Que va Richard no quiero arriesgarme, esta difícil la cosa !!!, esto es como el
cuento del alambrado da~nado y finito , si te pones a trastearlo mucho lo jodes
mas !!!. Esas herramientas y comandos por supuesto son buenos y funcionan pero
en este caso el disco duro esta tan dando que si lo trasteas mucho se jode mas
aun en vez de mejorarlo. El windows funciona y ademas de disco duro nuevo
realmente el otro grave problema es que el win 10 que tiene es el Pro por ende
crackeado pues el sticker original de este laptop es Win7 de fabrica y por ende
si se puede activar win 10 de gratis antes de que venza ahora en 2025 pero
seria la versión Home , no la versión Pro. Parece este laptop ya había tenido
problemas y lo forrajearon seguro y le metieron el win 10 pro aunque el disk
manager de windows si muestra que tiene una partición recovery de 6 GB que
puede que si , puede que no , este intacta pero l dudo mucho pues el disco duro
hay que cambiarlo , se puede usar pero que va ese se jode en cualquier momento
ademas de que como es lógico al tener tantos los puede que se te cierre el
navegador Edge por ej mientras estas componiendo un email .
Tough call !!! , stay como mi medico de familia que insiste que no se puede
flash the ears a la fuerza y que hay que ablandar el Wax o serumen !!! jejejeje
, así que no voy a trastear mucho mas el disco por si acaso y seguiré la máxima
de que el disco “no sirve pero si lo usas pa data quizás te dure mas pues com
Ono es sistema se usa mucho menos” así que le explicare al vecino que tiene
que comprar un disco duro de laptop nuevo o de uso pero en buenas condiciones.
Este Hitachi Richard curiosamente vea en el smartctl -a c: o sea reporte smart
ALL o completo , vea dice que la temperatura del disco es 42????? , demasiado
excesivo como si estuviera rozando algo digo yo pues aqui la temp exterior hoy
es incluso 18 grados y en la casa el A/C esta funcionando a 23 grados asi que
no debería realmente calentarse así si no hubiera rozamiento aunque seguro ha
estado trabajando intenso desde ayer pues lo deje toda la noche windows
intentando repararlo y parece que si logro hacer algo pues ya al menos si botes
y arranca y puedes supuestamente hacer todo aunque claro en algún momento estoy
segur mete pantalla azul o se te cierra un app como Edge por ejemplo. No
obstante smartmoxntools si se instaló sin li ose la web oficial y se ejecuto
sin bios, ademas notepad tambien pues ahi copie este reporte smart que muestro
a continuación.
Realmente realmente incluso el audio y el video YouTube funciona así que no
parece tener corruptos ya muchos ficheros de sistema así que el comando sec
/scannow no se lo quiero pasar pa no hacer sufrir mas al disco. Demasiados
parámetros SMART están en PRE-FAIL status y para colmo el sector re-allocated
ya dice failing now Y LO QUE ES PEOR ES QUE REALMENTE SMART ESTA REPROTANDO
FAILED !!!! Por ende Richard , como es posible que el salto System Setup o BIOS
en el arranque no reporte ess?, no proteste que el disco esta failed smart? ,
en el bios no veo nada que impida eso por cierto , tal parece como si este
supuestamente High end laptop no tenga la opción de reportar smart status en el
bios, lo pasare ahora a usar UEFI a ver si lo dice digo yo !!! Jejejeje aunque
en realidad ambos el menú debe ser similar seguramente.
Y por supuesto el OS Win 10 tampoco avisa de que smart esta failed en ese disco
, habría que instalar estos tools de terceros como smartmoxntools y ejecutarlas
para enterarse pero eso el user promedio no lo hace seguramente.
Cheers
JJ
C:\Program Files\smartmontools\bin>smartctl -a c:
smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-1511] (sf-7.2-1)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar 5K750
Device Model: Hitachi HTS547575A9E384
Serial Number: J2190059DVPH0C
LU WWN Device Id: 5 000cca 6dfda39cd
Firmware Version: JE4OA60A
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jun 14 14:55:19 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 187) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 077 077 062 Pre-fail Always
- 65470537
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 182 182 033 Pre-fail Always
- 1
4 Start_Stop_Count 0x0012 096 096 000 Old_age Always
- 6633
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always
FAILING_NOW 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 092 092 000 Old_age Always
- 3907
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always
- 5248
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 72
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always
- 10721
194 Temperature_Celsius 0x0002 142 142 000 Old_age Always
- 42 (Min/Max -16/46)
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always
- 2863
197 Current_Pending_Sector 0x0022 055 055 000 Old_age Always
- 1240
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 24107 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 24107 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 25 48 9a 73 04 Error: UNC at LBA = 0x04739a48 = 74685000
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 28 38 45 9a 73 40 00 00:23:13.445 READ FPDMA QUEUED
61 10 30 8d 5c 42 40 00 00:23:13.423 WRITE FPDMA QUEUED
61 20 28 8d c6 e2 40 00 00:23:13.399 WRITE FPDMA QUEUED
61 08 20 cd 08 09 40 00 00:23:13.337 WRITE FPDMA QUEUED
b0 da 00 00 4f c2 00 00 00:23:13.293 SMART RETURN STATUS
Error 24106 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 48 9a 73 04 Error: UNC at LBA = 0x04739a48 = 74685000
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 10 45 9a 73 40 00 00:23:09.769 READ FPDMA QUEUED
b0 d1 01 01 4f c2 00 00 00:23:09.543 SMART READ ATTRIBUTE THRESHOLDS
[OBS-4]
b0 d0 01 00 4f c2 00 00 00:23:09.539 SMART READ DATA
60 08 f8 65 57 a4 40 00 00:23:09.486 READ FPDMA QUEUED
60 08 f0 e7 a2 b6 40 00 00:23:09.452 READ FPDMA QUEUED
Error 24105 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 48 9a 73 04 Error: UNC at LBA = 0x04739a48 = 74685000
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 45 9a 73 40 00 00:23:05.617 READ FPDMA QUEUED
61 68 50 25 7b ac 40 00 00:23:05.558 WRITE FPDMA QUEUED
61 10 48 cd 34 40 40 00 00:23:05.536 WRITE FPDMA QUEUED
61 08 40 0d 06 09 40 00 00:23:05.475 WRITE FPDMA QUEUED
2f 00 01 10 00 00 28 00 00:23:05.466 READ LOG EXT
Error 24104 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 48 9a 73 04 Error: UNC at LBA = 0x04739a48 = 74685000
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 38 45 9a 73 40 00 00:23:01.973 READ FPDMA QUEUED
61 08 30 dd 5d 46 40 00 00:23:01.820 WRITE FPDMA QUEUED
61 30 28 9d db 11 40 00 00:23:01.820 WRITE FPDMA QUEUED
61 10 20 bd 34 40 40 00 00:23:01.794 WRITE FPDMA QUEUED
61 08 18 65 5e 46 40 00 00:23:01.742 WRITE FPDMA QUEUED
Error 24103 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 48 9a 73 04 Error: UNC at LBA = 0x04739a48 = 74685000
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 45 9a 73 40 00 00:22:58.321 READ FPDMA QUEUED
61 28 f8 cd f4 ac 40 00 00:22:58.272 WRITE FPDMA QUEUED
61 10 f0 6d 29 3b 40 00 00:22:58.248 WRITE FPDMA QUEUED
61 08 e8 35 05 09 40 00 00:22:58.183 WRITE FPDMA QUEUED
2f 00 01 10 00 00 28 00 00:22:58.168 READ LOG EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
C:\Program Files\smartmontools\bin>
On Jun 14, 2021, at 1:41 PM, richard lopez <xrichard79@xxxxxxxxx> wrote:
Aqui te va el sfc /scannow
con esto restauras todo