As an old carman, there is one aspect here that I do not understand. I don’t
pretend to have followed the official, publically-available information in
great detail.
However, a great fuss is being made about the engine shut-down affecting the
brakes. If the air brakes were applied, I don’t see how an engine shut down
would
make a difference to anything. Something must have been done by somebody to
cause those train brakes to release. Either that, or enough cars had leaking
brake
cylinders to cause what in effect would be an undesired brake release.
Properly functioning air brakes on those cars should have been able to sustain
a brake
application for days or even weeks or even longer. The thing is: ‘maintaining
air’ means that a lot of people don’t know what they are talking about. A
sudden
lost of air should have put the train brakes into emergency application. A
slow loss of air from the train line should have meant a tighter brake
application. An
engine shut down means that the retaining valve feature on the locomotive would
cease to sustain the train-line pressure at the point where the engineer left
it. A loss of the pressure maintaining function doesn’t lead to a brake
release, if the brakes on the train are functioning properly. If the engineer
only made a minimum
brake reduction, it may not have been enough to set up every car. But that is
the only explanation I can see beyond somebody releasing the brakes or doing
something
to cause a ripple in the train line brake pressure ... just enough to fool the
portions into a release. I’ve seen that happen. Otherwise, if nobody touched
anything
they shouldn’t have, there must have been a lot of cars with brake cylinders
suffering some degree of blow-by so that they weren’t holding a set-up properly.
This is an issue which will probably become more of an issue with the passage
of time, because so far as I know, there are no set regulations for how long an
individual car has to sustain an air brake application. Neither are cars being
inspected for such things the way they used to be.
Again, I stand to be enlightened.
Joe Smuin
From: mailto:cpsig@xxxxxxxxxxxxxxx
Sent: Thursday, May 22, 2014 1:20 PM
To: cpsig@xxxxxxxxxxxxxxx
Subject: [cpsig] Re: Fw: Central Maine & Quebec CEO: 'We'll have to prove
ourselves'
Here is what I understand happened:
The train was left on the main line NOT in a siding because it was blocked by
empties for the mill in town. SOP (Standard Operating Practice). Engineer
applied 11 hand brakes, one more than the 10 required by MM&A. Firemen cut off
fuel (this is done outside, on the ground, not in the cab) again SOP for
fighting fires. MOW person was advised by firemen they had shut down unit. MOW
man advised RTC. One hour and 5 minutes later the train ran away. It would
appear the RTC failed to take action to get unit(s) restarted in order to
maintain air. Maybe he was unaware of the seriousness of the situation. Maybe
he was not advised of shutdown of other units although again, this was SOP and
he SHOULD have known. I am guessing this is why he was arrested. In any event
he had a key role as the person in charge of things at the time. Manage
arrested as he is also responsible for matters. Not sure why the President was
not arrested too at that rate. CEO Burkhardt was in USA.
The real fault lies in Ottawa. BTC inspectors used to rule over safety and
issue fines if in violation. Unfortunately, we don't have the Government of
Canada anymore. We now have the Harper government which lets railways and
others police themselves. TC inspectors cannot even issue fines.
What happened is what happens in all tragic disasters Titanic etc. Not any one
thing went wrong, not any one person to blame. It comes about with a number of
things coming together at the wrong time. Sad, very sad.
Raymond
