[chaoscope] Re Image Sizes
- From: "James Skemp" <jamesrskemp@xxxxxx>
- To: "Chaoscope list" <chaoscope@xxxxxxxxxxxxx>
- Date: Wed, 12 May 2004 04:45:52 -0500
Regarding the previous post about image sizes on the large end, what
about on the small end?
Try creating an image that is 0 x 0 - it works and even allows you to F3
and F4. Saving the image, on the other hand, saves a 0 kb file.
-1 x -1 works as well, will allow you F3, F4, and save, but when you
save you save an all black, 65532 x 1, 192 kb, file.
Last test this early morning (it's almost five in the morning here - I
woke up with Chaoscope on the brain and had to do these few tests ;) ) -
create a new -10 x -10 image or -100 x -100 image - where's the window
(the smaller one with the image, not the larger one)? Note that the
Width/Height fields display correctly (in that only positive values can
be used) but also incorrectly (in that they are not the actual size of
the window...) - where are the height/width values coming from? Are
they abs() after being passed from the image window?
~James
--
James Skemp
jamesrskemp@xxxxxx
http://jamesrskemp.net/
======================================================
The Chaoscope mailing-list
Archives : //www.freelists.org/archives/chaoscope
Admin contact : chaoscope@xxxxxxxxxxxxxx
Web site : http://www.chaoscope.org
======================================================
Other related posts:
- » [chaoscope] Re Image Sizes
