[cdvdburn] Re: Lite-On SOHW-1693S DVDRW
- From: Gary Locock <gary@xxxxxxxxxxxx>
- To: cdvdburn@xxxxxxxxxxxxx
- Date: Mon, 02 Jan 2006 23:24:58 +0000 (GMT)
In article <4de3058712rhnews@xxxxxxxxxxxxx>,
Rob Hemmings (News) <rhnews@xxxxxxxxxxxxx> wrote:
> In message <4de1163158gary@xxxxxxxxxxxx> Gary Locock
> <gary@xxxxxxxxxxxx> wrote:
> > Second, there seems to be a problem with recognising the discs.
> > After burning the first disc successfully, I had several failures.
> > The software would go through all the motions, counting down the %
> > indicator, and eventually the 'disc successfully written' banner
> > would come up. The only difference from normal was that the drawer
> > was not ejected when the banner appeared, and when extracted the disc
> > was completely blank. It appears that the hardware had also 'gone
> > through the motions', but hardware or software had forgotten to
> > switch on the laser!
> I don't know whether this will help but I experience a similar problem
> with exactly the symptoms described above on the first time I try to burn
> a new DVD. However, if I then retry (without changing anything!) the
> second attempt always works fine.
OK, similar, but it isn't as predictable in my case. Enough to show it isn't
just me, at any rate!
Gary
--
Gary Locock, Network Manager, Bablake Junior School
Coundon Road, Coventry CV1 4AU
School Website: http://www.bablakejs.co.uk
Private mail: g a r y (at) l o c o c k . c o . u k
---
[This E-mail has been scanned for viruses but it is your responsibility
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
Other related posts:
