dear bvi pilots, it is possible for us bvi pilots to fly the realair duke turbine. if you put the plane in to the simulator without changing anything you will get stuck when you have to start the engine. although you can work through the checklist until than, when you say fire-up number two the engine tries to start but will not fully start-up. what you have to do: open the config panel.exe in your realair duke 10 folder. for the next step you need a sighted person. he or she has to go to the realism tab and set the aircraft on ready to taxi. than save the changes and you are done. you will know if it went correctly when you put the aircraft in the simulator and the engines will start automaticly. now if you want to do all the checklists just press ctrl+shift+f1 and than say to Michel do all checklistst. and voila you have a working realair duke turbine! I hope this will help someone, Mitchel Blind and Visually impaired Pilots mailinglist //www.freelists.org/list/bvipilots To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of your message. For other options such as digest, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your message.