[bvipilots] Visual Approach Issue
- From: Jody McKinniss <jlove42010@xxxxxxxxx>
- To: bvipilots <bvipilots@xxxxxxxxxxxxx>
- Date: Sat, 19 Apr 2014 11:24:04 -0400
I was going to post this in the forum, but it keeps telling me "an
error has occurred when I try to post it, so I will post here. I did
the descent checklist as required by the manual, and got the following
error when ready for visual approach. Relevant log below:
10:18:23
Michelle said: 7000, -1900, 310
10:18:29
You said: prepare to land on runway one four left
10:18:34
Michelle said: Roger. I've made the course one four zero, and I will
shortly be turning the aircraft towards the approach entry point.
10:18:37
Michelle said: Airport is 18 miles.
10:18:46
Michelle said: The airport is at our eleven o clock
10:18:46
Michelle said: Distance to entry point, 11 miles.
10:18:51
Michelle said: 6000, -1900, 300
10:18:59
Michelle said: Airport is 16 miles.
10:19:13
Michelle said: The airport is at our ten o clock
10:19:13
Michelle said: 5000, -1900, 288
10:19:32
Michelle said: Airport is 14 miles.
10:19:42
Michelle said: The airport is at our ten o clock
10:19:42
Michelle said: 4000, -300, 280
10:20:09
Michelle said: Level at 4000
10:20:09
Michelle said: Flaps 1.
10:20:13
Michelle said: The descent checklist has been completed.
10:20:18
Michelle said: Airport is 12 miles.
10:20:22
Michelle said: The airport is at our ten o clock
10:20:23
Michelle said: Captain. This might be a good time to do the approach
checklist. 10:20:24
Michelle said: Distance to approach point, 4 miles.
10:20:31
You said: approach checklist
10:20:43
Michelle said: Roger. We'll do the approach and landing checklists.
10:20:44
Michelle said: Do you want me to assist you?
I said "affirmative," and this is what resulted:
10:20:49
Value: EXCEPTION: Timer2() Conversion from string "14L" to type
'Double' is not valid. 10:20:51
Value: EXCEPTION: Timer2() Conversion from string "14L" to type
'Double' is not valid...
(repeats)
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of
your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Other related posts:
