I have that same issue. If I forget to turn on my USB headset before starting FSX or I decide to use my headset through the audio jacks as in the case is when my fiance is around, I have to switch both the Voice and sound to which ever mode I am using. FSX does not see the default sound settings on a Windows 7 64bit computer it seems like. My 32bit system never had this issue. Jordan -----Original Message----- From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Moore Sent: Thursday, March 29, 2012 7:14 AM To: bvipilots@xxxxxxxxxxxxx Subject: [bvipilots] Re: Simple ATC just a thought. check in settings sound and see what your voice device is set to. I had this issue on windows 7 64 bit where I heard no atc feedback and it was set to "default voice device" which gave me nothing. When I explicitly defined a sound device, I got atc sound back. Brian. Contact me on skype: brian.moore follow me on twitter: http://www.twitter.com/bmoore123 On 28/03/2012 6:43 PM, Adam wrote: > Yeh I hear nothing at all times It doesn't matter whtere I ask for ifr > clearance or taxi clearance or simply the weather by saying get atis or get > local weather no response! > > > > Stealth > 12844 > Have a good Day! > > -----Original Message----- > From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] > On Behalf Of Tony > Sent: Wednesday, March 28, 2012 2:57 PM > To: bvipilots@xxxxxxxxxxxxx > Subject: [bvipilots] Re: Simple ATC > > Does this apply to all ATC? > > By this I mean, do you never hear anything from those Air Traffic > Controllers? > > T > > -----Original Message----- > From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] > On Behalf Of Adam > Sent: 28 March 2012 00:47 > To: bvipilots@xxxxxxxxxxxxx > Subject: [bvipilots] Re: Simple ATC > > Hello Tony > I am not sure if it has to do with the voice Transcript file Because Michell > is hearing and accknowleging the commands I am just not getting any feed > back from in this case Fx simulator! I have checked the sounds and I get > all of the audio as far as the switches being flipped and the engine sounds > etc! Its just when I go to request for the weather nothing happens! > > For example: When I would say turn the battery master switch on I get a > click and when I say avionics on michell responds with avionics on and > checked then if I were to say get atis I hear a click from iyp and nothing > and then if I were to say get local weather I hear the same click from iyp > and nothing no response and that goes for everything even if I run down the > checklist up to the point of requesting taxi clearance or ifr clearance I > get nothing! > > I am lost no surprise! > Smile > > > > Stealth > 12844 > Have a good Day! > > -----Original Message----- > From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] > On Behalf Of Tony > Sent: Monday, March 26, 2012 1:50 PM > To: bvipilots@xxxxxxxxxxxxx > Subject: [bvipilots] Re: Simple ATC > > I'd be happy to take a look at your voice Transcript file Adam if that > helps, I ran the flight yesterday with no issues other than my > forgetfulness, all worked fine. > > Heavy use of the pause key and referring back got me from A to B, although > my passengers will surely have bailed out sensing my incompetence. > > T > > -----Original Message----- > From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] > On Behalf Of Adam > Sent: 26 March 2012 04:39 > To: bvipilots@xxxxxxxxxxxxx > Subject: [bvipilots] Simple atc > > Hello all to who are using simple atc I would like to know how its going I > am having a bit up difficulty! > I am doing the first test > And using a boeing 737-800 with Fx it seems like when I am flying from > Pennsylvania to Ontario when I load the flight test everything comes up but > when I rundown the checklist and it comes to the weather it skipps the check > list part of that and when I just say get atis or get local weather nothing > happens I am using the IFr flight plan I also make sure that a destination > is set as well as I verify that I am using Ifr by saying select Ifr! > > Any help would be great! > Thanks > > > > Stealth > 12844 > Have a good Day! > > > Blind and Visually impaired Pilots mailinglist > //www.freelists.org/list/bvipilots > To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To > unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the > word unsubscribe in the subject of your message. > For other options such as digest, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your > message. > > Blind and Visually impaired Pilots mailinglist > //www.freelists.org/list/bvipilots > To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To > unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the > word unsubscribe in the subject of your message. > For other options such as digest, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your > message. > > Blind and Visually impaired Pilots mailinglist > //www.freelists.org/list/bvipilots > To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To > unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the > word unsubscribe in the subject of your message. > For other options such as digest, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your > message. > > Blind and Visually impaired Pilots mailinglist > //www.freelists.org/list/bvipilots > To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To > unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the > word unsubscribe in the subject of your message. > For other options such as digest, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your > message. > > Blind and Visually impaired Pilots mailinglist > //www.freelists.org/list/bvipilots > To post a message to the list, send a message to > bvipilots@xxxxxxxxxxxxx > To unsubscribe, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of your message. > For other options such as digest, send a message to > bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your message. Blind and Visually impaired Pilots mailinglist //www.freelists.org/list/bvipilots To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of your message. For other options such as digest, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your message. Blind and Visually impaired Pilots mailinglist //www.freelists.org/list/bvipilots To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject of your message. For other options such as digest, send a message to bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your message.