[bvipilots] Re: Asking a third party sound installer and third party Ga sound utility question.

  • From: Robert Cezar <robert@xxxxxxxxxxxxxxx>
  • To: bvipilots@xxxxxxxxxxxxx
  • Date: Wed, 31 Jul 2013 15:22:46 -0700

Hi,

Well, you must be doing something different that want I did.

When I installed it per the documentation, it created all of the necessary
folders and files and it worked perfectly.

I would suggest that you try installing it again.

Robert



On Wed, Jul 31, 2013 at 2:21 PM, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx>wrote:

>   Can’t find it anywhere.
> Except from the folder that I made today that still has nothing in it.
> Please advise.
> Thanks.
>
> Ron and current Leader Dog boz who states
> "that a service dog beats a cane paws down any day of the week."
>
>  *From:* Robert Cezar <robert@xxxxxxxxxxxxxxx>
> *Sent:* Wednesday, July 31, 2013 5:05 PM
> *To:* bvipilots@xxxxxxxxxxxxx
> *Subject:* [bvipilots] Re: Asking a third party sound installer and third
> party Ga sound utility question.
>
> Hi,
>
> That folder is likely already there.  Please see if you can find it.
>
> r :-)
>
> On Wed, Jul 31, 2013 at 1:58 PM, Ron Kolesar 
> <kolesar16417@xxxxxxxxxxxxxx>wrote:
>
>>   Thanks Robert.
>> I didn’t see those files when I installed the falcon.
>> The one last question that I have.
>> They say to make a folder inside the FSX folder labeled groundhandling 5.
>> Now do they want us to go to the falcon’s sound file and copy the files
>> out of that file and copy them to the new ground handling 5 sub folder, or
>> do they want you to copy the sound folder to the groundhandling 5 sub
>> folder inside fsx?
>> Thanks and loved your you tube falcon 7 x tutorial.
>>
>> Ron and current Leader Dog boz who states
>> "that a service dog beats a cane paws down any day of the week."
>>
>>  *From:* Robert Cezar <robert@xxxxxxxxxxxxxxx>
>> *Sent:* Wednesday, July 31, 2013 4:11 PM
>> *To:* bvipilots@xxxxxxxxxxxxx
>> *Subject:* [bvipilots] Re: Asking a third party sound installer and
>> third party Ga sound utility question.
>>
>>  Hello Ron,
>>
>> REGARDING: INSTALLATION
>>
>> The installation procedures are explained in excruciating detail in the
>> README FIRST.TXT file. Presuming that you cannot access that file, here's
>> what it says:
>>
>> START OF DOCUMENTATION
>>
>>  PREMIER AIRCRAFT DESIGN
>> DASSAULT FALCON 7X for FSX
>> This model is for DX9 graphics only
>>
>> Aircraft, panel and sound package
>> including dynamic VC with custom gauges.
>>
>> For more information look inside the MANUALS folder :
>> Flying tips.txt (ESSENTIAL READING)
>> Glass Panel map1.jpg
>> Glass Panel map2.jpg
>> Falcon7X_check.htm
>> Falcon7X_ref.htm
>>
>> Copyright 2009 by Premier Aircraft Design
>> Email contact support@xxxxxxxxxxxxxxxx
>>
>> Visit PAD at http://www.premaircraft.com for more Falcon liveries (when
>> available) & more models.
>>
>> MAIN CREDITS
>>
>> Model & Master Textures:                       Jean-Pierre Brisard
>> Panel design and XML gauge programming         Jean-Pierre Brisard
>> Paint & Flight dynamics  :                     Bob May
>> Additional Flight tuning :                     Danny "Chief" Crance
>> Falcon trijet sound file by kind permission of Aaron Swindle
>>
>> PACKAGE INSTALLATION:
>>
>> Extract ALL the files into the FSX MAIN Folder using
>> WINZIP in Classic Mode...Do not use the Wizard...
>> Make sure the "Use Folder names" BOX is checked in WINZIP.
>> New folders will be created and all files installed.
>>
>> Here's how by the numbers...
>>
>> 1. Navigate to where you downloaded the zip file
>>
>> 2. Double click with your mouse on the zip  file.
>>
>> 3. WINZIP should open and show all the files inside the zip.
>>
>> 4. Press 'CTRL A' and this will select ALL the files.
>>
>> 5. Click on upper 'Extract' Button in the Main Tool Bar above.
>>
>> 6. Type in your path in the dialog box the default location is C:\program
>> files\microsoft games\microsoft flight simulator X
>> or browse to your FSX Location...open the FSX main folder.
>>
>> 7. Now click on the 'Extract' button in the upper right.....you're
>> done...go flying.
>>
>> OPERATING TIPS
>>
>> 1. Turn on Tool Tips....Lots of panel information available.
>> Go to Options - Settings - General....Click the "Show Tool Tips" box.)
>>
>> 2. SHIFT E opens/closes the passenger door and airstair, there is no
>> separate crew door. The door will not open in flight.
>>
>> 3. To Raise your seat higher press SHIFT-ENTER (in FSX this only works in
>> VC view)
>>
>> 4. " I " key toggles engine smoke ON/OFF.
>>
>> 5. Read the "Flying Tips" document in the 'Manuals' folder
>>
>> 6. Don't ask how to make the yoke appear in the VC, there are no yokes,
>> the Falcon 7X has "fighter style" side controllers.
>>
>> Quick Reference - VC EYEPOINT KEY COMMANDS :
>>
>> Move eyepoint back into passenger cabin
>> CTRL+ENTER (press and hold)
>>
>> Move Eyepoint Down
>> SHIFT+BACKSPACE
>>
>> Move Eyepoint Forward
>> CTRL+BACKSPACE
>>
>> Move Eyepoint Left
>> CTRL+SHIFT+BACKSPACE
>>
>> Move Eyepoint Right
>> CTRL+SHIFT+ENTER
>>
>> Move Eyepoint Up
>> SHIFT+ENTER
>>
>> Reset Eyepoint
>> SPACE
>>
>>                           LEGAL NOTICE
>>
>> 1. These files are for free use and enjoyment of individual hobby
>> flightsimmers but the copyright remains with us and any other persons who
>> have contributed to the work.
>>
>> 2. The model files, panel files and gauges should not be altered and
>> cannot be incorporated into other shareware or freeware programs or
>> published on any electronic or mechanical media anywhere in the world
>> without our written permission. This includes  CD's, DVD's or other media
>> offered free, whether as part of a commercial or non-commercial transaction.
>>
>> 3. REPAINTING. You may repaint this aircraft FOR YOUR OWN EXCLUSIVE use
>> without seeking permission, but if you intend to upload the repainted
>> aircraft to any web site or bulletin board, including a Virtual Airline
>> site, then contact us first for permission, just send a jpg screen shot.
>>
>> We recommend 'Textures Only' uploads due to the file size and we reserve
>> the right to check the files and documentation before publication.
>>
>> Premier Aircraft Design
>> Contact us email at: support@xxxxxxxxxxxxxxxx
>> April 2009
>>
>> END OF DOCUMENTATION
>>
>> REGARDING: Performance
>>
>> At the top of the checklists you will find the information you are
>> looking for.
>>
>> I hope this helps.
>>
>> Robert
>>
>>
>>
>> On Wed, Jul 31, 2013 at 11:22 AM, Ron Kolesar <
>> kolesar16417@xxxxxxxxxxxxxx> wrote:
>>
>>> Hi to all.
>>> Ihad to uninstall both my third party sound packages.
>>> I have successfully installed the new falcon x aircorft for we FSX BVI
>>> pilots.
>>> The falcon shows up everywhere.
>>> But I can not get it to show up in the list of aircrafts in the two
>>> third party sound packages.
>>> Can anyone walk me through on how to add a new aircraft to the list in
>>> these two sound packages?
>>> I have also already have the bird shared and with everyone and total
>>> control checked.
>>> one question of curiousity.
>>> Will this bird replace the older citation x C750?
>>> Will it go further and so on?
>>> Just curious about the comparsion stats on the two birds.
>>> Many Many thanks.
>>>
>>> Ron and current Leader Dog boz who states
>>> "that a service dog beats a cane paws down any day of the week."
>>> Blind and Visually impaired Pilots mailinglist
>>> //www.freelists.org/list/**bvipilots<//www.freelists.org/list/bvipilots>
>>> To post a message to the list, send a message to
>>> bvipilots@xxxxxxxxxxxxx
>>> To unsubscribe, send a message to
>>> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
>>> put the word unsubscribe in the subject of your message.
>>> For other options such as digest, send a message to
>>> bvipilots-request@freelists.**org <bvipilots-request@xxxxxxxxxxxxx> and
>>> put the word help in the subject of your message.
>>>
>>
>>
>>
>> --
>>
>>
>> AOPA Member No: 06936977
>>
>>
>
>
> --
>
>
> AOPA Member No: 06936977
>
>


-- 


AOPA Member No: 06936977

Other related posts: