[bvipilots] Re: Aircraft

  • From: Declan Webster <declan.webster44@xxxxxxxxx>
  • To: bvipilots@xxxxxxxxxxxxx
  • Date: Sun, 26 Mar 2017 02:06:16 +0100

Thanks, makes complete sense.

Sent from my iPhone

On 26 Mar 2017, at 00:55, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:

Hello Declan.

RE: is there any function in IYP which would allow me to quickly check what 
airports are around me

Actually, no there is not.  Why? Because it is a very complex subject matter. 
e.g., if you take off from Calgary Alberta Canada with a Boeing 744 HEAVY, 
and you fly West towards Vancouver, BC and you're at the mid way point in the 
trip, then there's really only 2 airports you could land at:  CYXX 
Abbotsford, BC or CYVR Vancouver, BC. By contrast, if you're flying the same 
route with a Boeig 738, then you could land at CYLW Kelowna, BC or perhaps 
CYYF Penticton. BC.  Or, if you're flying a C172 Skyhawk, you could land at 
the tiny airport CBR2, Kaslo, BC.  Ergo... it's too complex for an 
application like IYP.  Thus... back to the human brain! (smiles)

r
      

On Sat, Mar 25, 2017 at 5:46 PM, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hello Jordan,

Well... BAD NEWS!!!

As a sighted pilot, I can operate the BATTERY MASTER SWITCH with a mouse, 
However, there is no keyboard shortcut, nor can one be set up according to 
Carenado.  Here's the topic:

https://www.avsim.com/forums/topic/475293-master-battery-toggle/

The Battery Switches shown on the "Lateral Switches" panel will not operate 
via a keyboard shortcut or externally assigned switch. They will only 
function when clicked by the mouse.

Sorry... r



On Fri, Mar 24, 2017 at 3:20 PM, Declan Webster 
<declan.webster44@xxxxxxxxx> wrote:
Robert
A bit off topic but just a quick question, is there any function in IYP 
which would allow me to quickly check what airports are around me, say if I 
was to just take off from an airport without setting a destination but then 
to land after doing a bit of exploring or flying

Sent from my iPhone

On 24 Mar 2017, at 16:39, Jordan Gallacher <jordanandseptember@xxxxxxxxx> 
wrote:

Thanks Robert.

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx 
[mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Cezar
Sent: Friday, March 24, 2017 2:07 AM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Aircraft

 

Jordan,

 

I forgot that I had removed that aircraft from my development system. I 
need to re-install. Will advise.

 

r

 

On Wed, Mar 22, 2017 at 4:50 PM, Declan Webster 
<declan.webster44@xxxxxxxxx> wrote:

Hi, if anyone could tell me where I'm going wrong that would be great. All 
I'm doing at the minute is unzipping the folder where the aircraft is and 
then putting it in my aeroplanes folder in FSX, None of them seem to be 
showing up though.

Sent from my iPhone


On 22 Mar 2017, at 22:52, Jordan Gallacher <jordanandseptember@xxxxxxxxx> 
wrote:

Thanks Robert. 

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx 
[mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Cezar
Sent: Wednesday, March 22, 2017 5:39 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Aircraft

 

Let me look into it.

 

r

 

 

On Wed, Mar 22, 2017 at 12:46 PM, Jordan Gallacher 
<jordanandseptember@xxxxxxxxx> wrote:

I don’t think it is an IYP problem because even if I do a Control E to 
fire everything up, even the engines won’t stay running.  I am wondering 
if there is a setting I need to change for this aircraft.

Thanks,

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx 
[mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Cezar
Sent: Wednesday, March 22, 2017 1:40 PM


To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Aircraft

 

Jordan,

 

If you review the checklist, it states:

 

(set) (turn) (the) battery master switch on   (NOTE: P3D V2 perform 
manually)

 

r

 

 

On Wed, Mar 22, 2017 at 10:43 AM, Declan Webster 
<declan.webster44@xxxxxxxxx> wrote:

Hi, yes the aircraft I installed were on the list. Is there something in 
the I YP manual that will give some info on this, I'm guessing it's pretty 
simple to install them though

Sent from my iPhone


On 22 Mar 2017, at 17:32, Jordan Gallacher <jordanandseptember@xxxxxxxxx> 
wrote:

Hey Robert,

Is there something I need to do to et the Carenado Phenom 300 to work?  
When I say things like Battery Master Switch On etc, nothing happens.

Thanks,

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx 
[mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Cezar
Sent: Wednesday, March 22, 2017 12:29 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Aircraft

 

Please ensure that the aircraft are listed on the IYP site as SUPPORTED.

 

http://itsyourplane.com/html/supported.asp

 

r

 

On Wed, Mar 22, 2017 at 1:02 AM, Declan Webster 
<declan.webster44@xxxxxxxxx> wrote:

hi, i downloaded a few freeware  aircraft and have them in my downloads 
folders, I have unzipped them but just wondering where would i put them 
now so they show up in fsx and  i can fly them in the future at some 
pointBlind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the 
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of 
your message.

 

 

 

 



Other related posts: