It doesnt need to be much more than a plywood box held together with like 1 1/4 inch deck screws, just from experience. On Oct 10, 2013 7:40 PM, "Armor Harris" <armorharris@xxxxxxxxx> wrote: > We have to ship it there, they have to take it out and put it back in to > ship it back, but after that we're not planning on using it again. > > > On Thu, Oct 10, 2013 at 6:22 PM, Alessandro Cesar Dias Gomes Filho < > acgfilho@xxxxxx> wrote: > >> Does the crate have to be reusable (hinges, pins) or can we just staple >> everything together? >> >> >> On Thu, Oct 10, 2013 at 5:07 PM, David Sindel <dsindel@xxxxxx> wrote: >> >>> The big apogee box is full of packing peanuts which may be useful for >>> this. >>> >>> *David Sindel* >>> Treasurer, BU Rocket Propulsion Group >>> dsindel@xxxxxx >>> >>> >>> On Thu, Oct 10, 2013 at 3:09 PM, Armor Harris <armorharris@xxxxxxxxx>wrote: >>> >>>> Yeah in the wind tunnel. >>>> >>>> >>>> On Thu, Oct 10, 2013 at 12:31 PM, Alessandro Cesar Dias Gomes Filho < >>>> acgfilho@xxxxxx> wrote: >>>> >>>>> I'll go there at 12:00 tomorrow and see what I can do. Are you still >>>>> going to be there Armor? >>>>> >>>>> Alessandro >>>>> >>>>> >>>>> On Thu, Oct 10, 2013 at 9:05 AM, Evan Mislick <emislick@xxxxxx> wrote: >>>>> >>>>>> I'm gonna have to withdraw from this one.... Suddenly got very sick >>>>>> and I'm going home as soon as I can >>>>>> On Oct 9, 2013 7:52 PM, <ngcerini@xxxxxx> wrote: >>>>>> >>>>>>> I can make it at noon but I have a class at 1 on Friday. >>>>>>> >>>>>>> Sent from Windows Mail >>>>>>> >>>>>>> *From:* D. Armor Harris >>>>>>> *Sent:* Wednesday, October 9, 2013 5:34 PM >>>>>>> *To:* burpg@xxxxxxxxxxxxx >>>>>>> >>>>>>> Ok so it sounds like the crate group is Jeff, Evan, and Nick. Let's >>>>>>> meet at noon on Friday in the wind tunnel if you can make it. >>>>>>> >>>>>>> >>>>>>> On Wed, Oct 9, 2013 at 2:16 AM, Evan Mislick <emislick@xxxxxx>wrote: >>>>>>> >>>>>>>> Ya I'll get in touch. Shouldn't need much more than a sheet or two >>>>>>>> of cheap plywood and some deck screws to do it. >>>>>>>> On Oct 9, 2013 1:48 AM, "D. Armor Harris" <davidh@xxxxxx> wrote: >>>>>>>> >>>>>>>>> Can you coordinate with Jeff Volpintesta? >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Oct 9, 2013 at 12:07 AM, Nicholas Cerini >>>>>>>>> <ngcerini@xxxxxx>wrote: >>>>>>>>> >>>>>>>>>> A friend of mine and I can take care of it, but do you mean to >>>>>>>>>> cover the frame with cardboard or to pad the inside of the wooden >>>>>>>>>> box with >>>>>>>>>> cardboard to keep the tank from moving around? What are the >>>>>>>>>> specifics? >>>>>>>>>> On Oct 8, 2013 10:31 PM, "D. Armor Harris" <davidh@xxxxxx> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Hey guys, >>>>>>>>>>> >>>>>>>>>>> We need someone to build a simple wood frame covered in >>>>>>>>>>> cardboard or shipping crate to encase the Mk IV oxidizer tank during >>>>>>>>>>> shipping to and from heat treat in Philadelphia. It's 8.3" diameter >>>>>>>>>>> x 90" >>>>>>>>>>> long. >>>>>>>>>>> >>>>>>>>>>> Should be a fun little project, but we need it no later than Oct >>>>>>>>>>> 28. Let me know if you're interested and I'll send you more >>>>>>>>>>> specifics. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> David Armor Harris >>>>>>>>>>> Boston University Rocket Propulsion Group >>>>>>>>>>> davidh@xxxxxx >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> David Armor Harris >>>>>>>>> Boston University Rocket Propulsion Group >>>>>>>>> davidh@xxxxxx >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> David Armor Harris >>>>>>> Boston University Rocket Propulsion Group >>>>>>> davidh@xxxxxx >>>>>>> >>>>>> >>>>> >>>> >>> >> >