[brailleblaster] Re: ViewPlus Technologies Tiger Cub (Legacy Mode) Approved to work with Mac OS X and Most Linux Distros Using CUPS
- From: Alex Jurgensen <asquared21@xxxxxxxxx>
- To: brailleblaster@xxxxxxxxxxxxx
- Date: Mon, 12 Dec 2011 18:30:45 -0800
Hi,
To get a Tiger to ork with the Mac, you will need "Embosser Admin Utility",
which will be available on http://myvipassist.com/ on the 1st of January.
I'm just transitioning the blog and main site now.
Regards,
Alex,
On 2011-12-12, at 4:27 PM, Michael Whapples wrote:
> I also would be very interested to get my tiger printer working with my Mac.
>
> Michael Whapples
> On 13 Dec 2011, at 00:18, Keith Reedy wrote:
>
>> Alex,
>>
>> This sounds great! I would be willing to buy one of these embossers if I
>> can be sure that it will work with the mac. I really need some way to print
>> braille from the mac.
>>
>> Thanks for the update.
>> Keith Reedy
>> keithreedy@xxxxxxxxxxxx
>>
>>
>>
>> On Dec 12, 2011, at 2:42 AM, Alex Jurgensen wrote:
>>
>>> Hi John G. and All,
>>>
>>> I am writing to let you all know that I have succeeded in getting the
>>> ViewPlus Technologies Tiger Cub braille embosser to work with Mac OS X and
>>> my Embosser Admin Utility.
>>>
>>> I am also writing to let you all know that legacy mode for the above
>>> printer is supported via CUPS on most Linux distros.
>>>
>>> I'll write more soon as it is rather late where I am and I'm heading out
>>> for the day.
>>>
>>> I hope this is encouraging to someone. I know I'm sure encouraged by it.
>>>
>>> Regards,
>>> Alex,
>>>
>>>
>>>
>>
>>
>
>
Other related posts:
