[bookport] Re: Section marker problem.
- From: "Jacques Bosch" <jacques.bosch@xxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Fri, 12 May 2006 14:53:17 +0200
OK, that would be the reason.
So every section marker must be at least 5 chars long?
Thank you much for the help.
Will be great to have that functionality back.
Any progress or plans on the sub-section markers?
Jacques
----- Original Message -----
From: "PAMELA RADER" <PRADER@xxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Friday, May 12, 2006 2:10 PM
Subject: [bookport] Re: Section marker problem.
Jacques:
It could be one of two things: Make sure you have 5 characters in your
string order for the program to recognize it; also, the key combination
has changed--it is now c plus f to move forward and a plus d to move
back. The reason it still works for the manual is that the old commands
are for Daisy. Since the manual is in that format it works there.
Pamela Rader, TECHNICAL SUPPORT
American Printing House For The Blind
1839 Frankfort Ave.
Louisville, KY 40206
PHONE: 1-800-223-1839, Ext. 307
jacques.bosch@xxxxxxx 05/11/06 04:12PM >>>
Good day all.
Did I miss something about section markers in that latest release, or
is
this actually a problem?
Since loading version 2.02 my section markers don't seem to work.
It is still the same files that used to work with section markers
before.
So I did a test with a new file and put some markers in (I tried with
+++
and _@_), and I did put those at the top of the list.
But no luck. I just get the error tone.
None of my files work with section markers, accept the Bookport user
manual,
I can still navigate from section to section on it.
This is very strange to me.
Any ideas?
Jacques.
Other related posts:
