[bookport] Re: BP upgraded today - APH staff look here
- From: <petrakigianos-giasou@xxxxxxxxx>
- To: bookport@xxxxxxxxxxxxx
- Date: Wed, 15 Jun 2005 09:06:40 -0700 (PDT)
Thank you.
--- ROB MEREDITH <rmeredith@xxxxxxx> wrote:
> Your Book Wizard is up-to-date. You can hear the firmware
> version by
> pressing A+C. LAME_enc.dll is on your PC.
>
> >>> petrakigianos-giasou@xxxxxxxxx 06/15/05 11:24AM >>>
> I upgraded both the software and firmware today. Had one small
> issue during the BP Transfer upgrade - the default directory
> to
> install disappearred on me so I had to browse for the
> directory
> which is c:\program files\aph\book port transfer
>
> To be sure I called APH and they told me the above directory
> was
> correct. Why did I lose the directory name in the edit box? I
> always do a insert+b command to review the dialog boxes with
> JAWS 6 and use the tab key and jaws cursor. Just my way to be
> sure.
>
> Copied this from BP Transfer's About button:
>
> About Book Port Transfer
> Book Port Transfer version 2.1.0.0graphic 245 Copyright (c)
> 2002-2005, American Printing House for the Blind, Inc.
> Book Wizard Reader version 1.0.8.0
> Copyright (c) 2001-2005, American Printing House for the
> Blind,
> Inc.
> ComRec audio engine version 6.4.0.0
> Copyright (c) 2000-2005, American Printing House for the
> Blind,
> Inc.
> Portions copyright (c) 2001-2005,
> Springer Design, Inc. All Rights Reserved.
> Portions copyright Aubible, Inc. All Rights Reserved.
> Includes Xaudio software, Copyright (c) 1996-2002,
> Xaudio Corporation. All Rights Reserved.
> LAME MP3 Encoder version 3.95 (www.mp3dev.org)
> Book Port firmware version 2.1.0.0
> Book Port serial number:not shown by Petro OK
>
> To APH:
> Is my Book Wizard up to date?
> The "Notes" folder appeared in my folders area on the BP so I
> know the new version was downloaded on the BP.
> What i s the keyboard command to hear firmware version on the
> BP
> device itself?
> Is this lame_encodr.dll found on my PC's hard drive or within
> my
> Book Port's unit. I know some applications requires a
> lame_enc.dll in order for them to work.
>
> Thank you again for your assistance over the telephone.
>
> Petro
>
>
>
Other related posts:
