That doesn't address the question. the question is how you can hear the
turntable playing whhile you are recording. I don't know if you can. You can
look in, I believe it's the play settings in the real Windows volume control
settings, I doubt this will be found in the Audacity settings, for listen to
this device or something similar. If there is a check box or some way to turn
this setting on, do so. But I don't know if it will work. Since your
turntable is being used as a sound card, it may try to play through the
turntable, which can't be done.
I'll let others discuss this further. There may be some way I don't know
about.
Gene
----- Original Message -----
From: Andrew Downie
Sent: Tuesday, April 03, 2018 5:55 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: settings in audacity
Hi Gary
This is the antithesis of your earlier problem. Whereas you don't want NVDA to
try to use the turntable as the sound card, you do want Audacity to do so.
The following is written with no prior experience of a USB turntable, but I am
reasonably confident that my knowledge of other USB devices will suffice.
Apologies if some or all of what follows is stuff you knew already:
1.. Make sure that the turntable is connected and is turned on before
launching Audacity.
2.. Press shift-control-f6. That will take you from the tracks view to the
section at the top of the screen which offers numerous settings.
3.. Shift-tab until you reach Playback Device. Assuming that is set to your
usual sound card, leave as is.
4.. Shift-tab once more and make sure that recording channels is set to two
(stereo).
5.. Shift-tab once more to Recording Device. Use up and down arrows until
you find your turntable.
6.. Press control-f6 to get back to the tracks view.
Andrew
From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx>
On Behalf Of Gary Metzler
Sent: Wednesday, 4 April 2018 8:11 AM
To: audasity <audacity4blind@xxxxxxxxxxxxx>
Subject: [audacity4blind] settings in audacity
Hi All,
I would like to know if there are any settings that need to be changed in
audacity so I can monitor the sound from my new usb turntable? I am using the
latest audacity and nvda. Thanks for any help.
Regards, Gary kn4ox
Send to: gmtravel@xxxxxxxxxxx
