At the time I had some timing issues. Perhaps reading about it will give you
some ideas?
https://alexschroeder.ch/wiki/2016-03-25_Atreus_Firmware_Upgrade
--
Typed on a tiny keyboard. Sorry for being terse.
On 1 Aug 2017, at 05:43, Phil Hagelberg <phil@xxxxxxxxxx> wrote:
Tyler Smith <tyler@xxxxxxxxxxxx> writes:
I'm having trouble uploading a modified firmware to my atreus. In normal
use, the atreus appears at:
/dev/usb/hiddev0
In bootloader mode it is not visible at all - diffing /dev/ before and
after shows no difference.
Are you sure you're successfully entering bootloader mode? It sounds
like it might just be staying in regular mode. Can you confirm that the
LED is pulsing in and out?
One thing I've found to be helpful on Linux is to run `dmesg --follow`
so you can confirm the point at which the new device shows up.
-Phil