In article <ea26c42a52.martin@xxxxxxxxxxxxxxxxxxx>, Martin Wuerthner <lists@xxxxxxxxxxxxxxx> wrote: > In message <522a532147riscos@xxxxxxxxxxxxx> Richard Ashbery > <riscos@xxxxxxxxxxxxx> wrote: > > In article <522959fcc7riscos@xxxxxxxxxxxxx>, Richard Ashbery > > <riscos@xxxxxxxxxxxxx> wrote: > >> This is a tricky one and may not be the correct list to raise it! > >> I have a Beagleboard -xM. If I try viewing an AW file which has > >> a Transparency graduation profile in Thump it produces a fatal > >> error - abort at data transfer &201E2F8C. Alignment Exceptions > >> are ON. If I remember to switch AE OFF then no error occurs. Is > >> this a problem with Thump or ArtWorks and can anything be done > >> about rectifying it? Having to press reset each time I forget to > >> switch AE OFF is annoying. > >> RISC OS 5.17 (01-Aug 11) ArtWorks 2.X1.00 Thump V1.51 > ArtWorks does not come into it. The deciding factor is the version > of AWViewer that is used. The first version that is compatible > with the BeagleBoard is 2.15. Sorry Martin - foolish mistake on my part. > I just created a test file with a transparency graduation profile > and AWViewer 2.15 displayed it just fine on my ARMini. That's useful to know. I've just repeated the test using only AWViewer 2.15 and I get an unrecoverable error &2034DA2C (1734). Where do I go from here please? Regards Richard ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------