Re: [artworks] Path tool and Undo
- From: Ger van Vugt <riscos@xxxxxxxxx>
- To: artworks@xxxxxxxxxxxxx
- Date: Thu, 22 Jun 2006 20:59:45 +0200
In message <ddc9e23a4e.martin@xxxxxxxxxxxxxxxxxxx>
Martin Wuerthner <lists@xxxxxxxxxxxxxxx> wrote:
> In message <8ac6ac070606220122y949a91dl400fc74cc98ce32@xxxxxxxxxxxxxx>
> "Gillian Seed" <mrseed@xxxxxxxxx> wrote:
>
> >> I'm running 2.57 (I'll be upgrading shortly), so apologies if the
> >> problem I have discovered is fixed in the latest version.
> >
> > The problem is still there in 2.61
> >
> >> If a create a straight path and then select both of its ends with the
> >> path tool and modify an attribute like its angle or length, upon
> >> pressing Undo ArtWorks reports "Internal error: abort on data transfer
> >> at &00016360" on my RiscPC running Adjust and "...at &000163E4" on my
> >
> > I get the error 'Get_Rectangle not called correctly'
>
> I have found the bug. The problem only occurs when you undo a change
> while PathUtils is still the current tool and the two path anchor
> points are still selected.
>
> This bug dates back to 1997 - nobody noticed until now!
Or nobody did now how to report this failler :-) because its happening
not al of the time.
I was told I needed 'Windows 2000 or better', so I use RISC OS 4.39
-------------------------------------------------------------------
RISC OS 4.39 Risc PC 700 SA, A9home and Artworks 2.55 user.
R.G. Select member. sitemaster http://www.riscosgg.nl
Other related posts:
