Am 12.01.22 um 00:20 schrieb Henry Spencer:
On Wed, 12 Jan 2022, Troy Prideaux wrote:Back during UNI ( for up front an electrical enineering diploma
There are also some practical fabrication advantages with Ti – it’s
much easier to weld compared to Al-Alloy and I don’t think you need to
retemper post welding and you don’t need to mix in different grades of
alloy to weld like you do with something like 6061.
But be very sure you're using the right welding procedure and weld wire.
Using the wrong weld wire (straight Ti rather than 6Al-4V), plus some
generally sloppy quality control and extensive pressure cycling,....
