Am 30.04.2020 um 19:18 schrieb William Claybaugh:
Uwe:put the repair blob on a conformal "tray"
That is a very good idea, and not your first.
I’m thinking I can’t just use a balloon because it will bulge into the
chipped area but that I might be able to use a balloon to hold in place
an internal “belly band” against which the patch can cure.
Bill
On Thu, Apr 30, 2020 at 10:50 AM Uwe Klein <uwe@xxxxxxxxxxxxxxxxxxx
<mailto:uwe@xxxxxxxxxxxxxxxxxxx>> wrote:
Am 30.04.2020 um 17:00 schrieb William Claybaugh:
> Troy:
>
> Thanks for the offer; if you can specify which phenolic resin I
should
> use I’ll just buy a little at this end.
>
> I’m inclined to patch paper phenolic with paper phenolic if
practical;
> the alternative appears to be EPDM, to me.
>
> One further question: this chip is about 4.5 feet (say about 1.4
> meters) down an 8.5” diameter tube: my arm can reach a maximum of
about
> three+ feet / one meter, fully stretched so I am going to have to
work
> out a remote placement procedure for this. Any suggestions?
>
stent applicator balloon catheter ( well the basic method )
Uwe