Re: [ARMini-support] Can Tablemate run on ARM6X?
- From: A Rawnsley <rcomp@xxxxxxxxxxx>
- To: <armini-support@xxxxxxxxxxxxx>
- Date: Thu, 30 Jun 2016 14:08:32 +0100
In message <2F2AFDBA-1C83-416D-9B63-96C5014A744F@xxxxxxxxx>
Tim Powys-Lybbe <tim@xxxxxxxxx> wrote:
I love Tablemate, so simple and flexible and powerful. I copied it
(version 5.03d) over to ARM6X but it squawked when I tried to run it,
saying:
File 'System: Module.ImageConv' not found
But I can't find where I may get a version of this that will run on ARM6X.
Anyone any ideas.
If put on the rack I would swear blind that Tablemate worked on my late
Iyonix, so I would say it was 32-bitted. But I could have this wrong.
Any advice please?
I've definitely had older versions running under Aemulor (eg. the version
supplied with Impression). Some of the Dalriada apps were troublesome (I
think Graphmate works but DiagramIt doesn't, or vice versa). I don't own
a TableMate 5 for testing though, I'm afraid.
If it is reporting a System module not found, I suspect that it will be
one that is installed from the TableMate disc. ImageConv isn't a system
module name that I'm immediately familiar with, so it isn't a standard
Acorn resource. It isn't present in my !System folder on my RISCube
either, which contains pretty much every application I have ever owned (so
has a fairly exhaustive !System).
As such, I'd start by looking on your previous RISC OS computer, in
!Boot.Resources.System.Modules hierarchy. Search for the ImageConv
module.
Sometimes Aemulor will fail to load some "linked" modules or components as
26bit code, so it is sometimes necessary to make minor mods to the !Run
file to use *AemuExec command (or set the filetype to be a 26bit one). I
can assist with this if required. For a more extensive example of how
this can be done in a manner that "works on everything", see the
ImpressionX !Run file.
If all else fails, I recommend looking at Fireworkz which offers some of
the tabling capabilities (and far more in the way of spreadsheet
calculation), and can export as !Draw for inclusion in other work.
Kind wishes,
Andrew
--
R-Comp
22 Robert Moffat, High Legh, Knutsford, Cheshire WA16 6PS
Tel: 01925 755043 Fax: 01925 757377
http://www.rcomp.co.uk
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts: