Re: [ARMini-support] ARMBook, Sound and Networkiing
- From: Doug Webb <dougjwebb@xxxxxxxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Sun, 13 Sep 2020 19:39:23 +0100
In message <efdd77af58.chris@xxxxxxxxxxxxxxxxx>
Chris Hughes <lists@xxxxxxxxxxxxxxx> wrote:
In message <a87271af58.dougjwebbOutlook@xxxxxxxxxxxxxx>
Doug Webb <dougjwebb@xxxxxxxxxxx> wrote:
Hi All,
I have MessengerPro that plays a sample when an incoming email meets
certain criteria.
If the USBEthernet device is plugged in and a Vonets Wifi device as well
for networking, it all works well until the battery runs down to around
60% and then when an incoming email triggers the sound sample to play the
ARMBook resets.
As a matter of interest why do you need both, at same time?
Hi Chris,
Good to hear from you.
So when I am in the lounge and feeling lazy I connect to the internet via
the Wifi on my router and to do so the Vonets acts as a WiFi to ethernet
bridge and has a RJ45 socket that I connect to the USBEthernet device that
gives an Ethernet port on the ARMBook as it has no built in one.
The Vonets then also needs a power source and hence it also needs to be
connected to a USB port.
Of course if I just want an Ethernet cable access then I could trail one
across the the lounge but that is not really a good option.
Hopefully when we get built in Wifi this will go away!
If I have the power adaptor plugged in when going below 60% it will not
trigger any issues.
Is there a battery manager in the ARMBook?
Yes it shows battery state, charging status etc.
Take Care
Doug
--
Experience the future using ARM Technology - ARMBook,BeagleBoard -xM,
PandaBoard,Raspberry Pi,iMX6/ARMX6,IGEPv5 & Titanium powered by RISC OS
5.27.
---
To alter your preferences or leave the group,
visit
//www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
