Hi All,
I have MessengerPro that plays a sample when an incoming email meets
certain criteria.
If the USBEthernet device is plugged in and a Vonets Wifi device as well
for networking, it all works well until the battery runs down to around
60% and then when an incoming email triggers the sound sample to play the
ARMBook resets.
If I have the power adaptor plugged in when going below 60% it will not
trigger any issues.
I guess it must be a combination of two devices drawing power, the sound
chip drawing power and the SDCard drawing power all at the same time that
triggers a safety limit reset?
If I use just the USBEthernet and connect via a Lan cable then the issue
is triggered at a lower battery state, around 50%, when an incoming email
plays a sound.
If I have no networking then the ARMbook will work right down to next to
nothing battery capacity.
I have te latest RComp ROM installed.
I guess a Battery pack could be used to power the external devices to
limit the load?
Doug
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx