Hi guys, I bought a LG W2420R widegamut RGB Led display in bundle with Spyder 3 colorimeter. LG provide a software in order to profile & calibrate monitor and upload LUT table using DDC link. In the software there is an option that permit to enable use of "profile correction for spyder3"; in program folder I found the file that I have attach: it's very similar to CCMX profile, but I can't understand what data contains. Do you think that is possible to "convert" this file into a ccmx standard file??? Should be nice to continue to use Argyll to calibrate & profile my new monitor...... thanks in advance Umberto Non temiamo alcun confronto: Tiscali ha l'Adsl più veloce d'Italia!Risparmia con Tutto Incluso Light: Voce + Adsl 20 mega a soli 17,95 € al mese per 12 mesi.http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw
"Spyder 3 on W2420" = { Name = "Spyder 3 on W2420" Device = "Spyder 3" ReferenceDevice = CS1000 Display = "W2420" Reference = " BEGIN_DATA_FORMAT XYZ_X XYZ_Y XYZ_Z END_DATA_FORMAT BEGIN_DATA 0.233 0.240 0.385 45.005 48.680 51.585 226.215 239.100 258.573 133.483 58.210 1.760 51.316 172.500 17.443 45.716 14.290 245.990 96.381 182.600 267.398 183.135 74.090 246.446 182.153 225.200 18.437 END_DATA" Data = " BEGIN_DATA_FORMAT XYZ_X XYZ_Y XYZ_Z END_DATA_FORMAT BEGIN_DATA 0.368 0.320 0.497 44.814 49.865 54.365 228.494 247.864 275.824 140.616 62.564 4.100 45.608 177.354 29.836 46.016 13.588 248.346 91.118 186.553 281.785 190.893 77.961 251.340 184.140 234.559 32.577 END_DATA" }