[argyllcms] Re: Using Argyll with an old densitometer (non-XYZ)
- From: Thomas Kumlehn <thomaskumlehn@xxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Tue, 21 Mar 2006 14:56:45 +0100 (CET)
--- Roger Breton <graxx@xxxxxxxxxxxx> wrote:
> As far as I know, Status densitites of any kind can't be
> translated to CIE XYZ ?
I had the hope I could measure print film strips with a transparency
measurement. (Status T is Positive, status A ist Negative ?)
I sounds like, filmread has to be run with measurements taken from the
screen inside your main projection room.
Is there anybody listening in Germany with a Gretag Spectro*** device
willing to start a private communication ?
Thanks - for bringing me back to earth :-)
Thomas Kumlehn
PIXEL PARTNER (R)
Member of the openBC network
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
Other related posts:
