Help folks what to do now where I've made mistake ?.. sources and image resoults in here http://www.artifot.pl/!test/ Marcin 2012/1/25 M. Kupiec <markupiec@xxxxxxxxx> > The problem occures on epson printer with proof manager and profile > assigned. Test image was iso coated cmyk gradients 0-100% each > Calibration was made remotely so i only based on telephone conversation, > and differences to good reference print. > Soon i'll get the some test strips printed on new profile to read, then > I'll get solid data, > > profile was maked this way: > > chartread -v -H -T0.4 > colprof -v -qu -D"t1" -qm -S AdobeRGB1998.icc -cmt -dpp t1 > profcheck -v2 -k -i D50 -o 1931_2 -w t1.ti3 t1.icm > t1.log > > > all files are here http://www.artifot.pl/!test/ > > > > Did i made mistake somewhere? > I hope that data help to make some judgment. > > > Btw i saw profilemaker 5 charts a4page that had 40x40 paches on a4 card > is it possible to get higher density sampes on page and safe to read with > standard i1pro hand ruler? > > > all files are here http://www.artifot.pl/!test/ > > > > > > > > > > 2012/1/25 Graeme Gill <graeme@xxxxxxxxxxxxx> > >> M. Kupiec wrote: >> > After the calibration yellow gradient 0 -100% become slightly blue in >> low >> > values 15-30%. There is happening something weird with the image >> >> Hi, >> you description is vague. What sort of test are you running >> to make this assesment? What is the workflow involved (ie. >> source profile, colors involved, intents, CMM/platform etc.) >> Please provide a link to your .ti3 file, the colprof >> options and arguments used, and any other profiles involved. >> >> Graeme Gill. >> >> > > > -- > Pozdrawiam > Marcin > -- Pozdrawiam Marcin