[argyllcms] Re: Non Argyll printer profile verification
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 17 Dec 2018 09:30:51 +1100
Yves Gauvreau wrote:
Hi,
Since my instrument is not top of the line (I1Studio) I thought of making
multiple reading
and use Argyll "average" to remove outliers as much as possible before
further processing,
any suggestion on this as well, I like the median approach but which one?
the primary differences between something like the i1Pro and the i1Studio is not
the reliability or repeatablity of the measurement process.
(In fact the i1Studio has higher repeatablility than the i1Pro, due to the use
of a more stable LED light source.) So making multiple measurements and
combining
them is not likely to be something that somehow makes the i1Studio more like an
i1Pro.
You may find benefit in doing this, but it would be to address the
repeatability and reliability of the measurement process, not something
that will have any influence on absolute accuracy.
Cheers,
Graeme Gill.
Other related posts:
