[argyllcms] Re: DTP94 LibUSB problem on Windows 10
- From: <graxx@xxxxxxxxxxxx>
- To: <argyllcms@xxxxxxxxxxxxx>
- Date: Mon, 25 Nov 2019 08:48:29 -0500
I decided I'm going to leave my SurfacePro tablet *as is*, for the moment, for
I found out I had some other profiler installed and working which was the
source of the X-Rite Device driver (that I would not want to disrupt) ...
Instead, I'll bring along my SONY VAIO laptop on which I successfully installed
DisplayCAL yesterday, onto which there was no previous instance of X-Rite
Devices driver.
Best / Roger
-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx <argyllcms-bounce@xxxxxxxxxxxxx> On Behalf
Of graxx@xxxxxxxxxxxx
Sent: Monday, November 25, 2019 8:07 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] DTP94 LibUSB problem on Windows 10
I could not get Windows 10 to “bind” to the DTP94 using :
C:\Windows\Users\Roger\AppData\Roaming\DisplayCAL\dl\Argyll_v2.1.1\usb\bin\x86\lbusb0.sys
Don't know what to say only that Windows returned an "error" trying to install
the device driver with no further explanation ☹
Then I tried plugging in my i1pro and the instrument showed up under X-Rite
Devices. "Naturally", even if I disabled the driver, I could not "bind" the
instrument to libusb0.sys because the instrument no longer showed up in the
list of devices -- darn. And as soon as I unplugged it and plugged it back, it
went straight to the X-Rite driver.
I tried my luck with my old i1display and got the same result.
This is on my SurfacePro tablet on which I must have installed some application
that installed the X-Rite drivers at some point? So there must be a way to
"uninstall" the X-Rite drivers.... I'm going to try to read up on how to do
that but if anyone has any suggestions, I am all ears!
/ Roger
Other related posts: