Hi!
How should I debug more of this? I'm running arch linux
$ lsusb
....
Bus 003 Device 005: ID 085c:0400 ColorVision, Inc. Spyder 4
...
So the instrument is connected and I'm part of colord group and
rebooted after adding myself there.
How do I get something usable out of dispcal? displcal is stuck
forever until I interrupt it. verbose setting doesn't tell anything
what is happening :(
$ dispcal -v -?
Calibrate a Display, Version 2.2.1
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Usage requested
usage: dispcal [options] outfile
-v [n] Verbose mode
-display displayname Choose X11 display name
-d n[,m] Choose the display n from the following list (default 1)
Optionally choose different display m for VideoLUT access
1 = 'Monitor 1, Output HDMI-0 at 0, 0, width 3840, height 2160'
2 = 'Monitor 2, Output DP-0 at 3840, 0, width 3840, height 2160'
-dweb[:port] Display via a web server at port (default 8080)
-dcc[:n] Display via n'th ChromeCast (default 1, ? for list)
-d dummy Dummy (non-existant, invisible) display
-c listno Choose instrument from the following list (default 1)
^C
$
Best regards,
Hannu Vuolasaho