[argyllcms] Re: Bad measurements & white point calibration with Argyll 0.7b7 and GretagMacbeth i1Display 2
- From: Kai-Uwe Behrmann <ku.b@xxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 10 Jan 2008 08:55:58 +0100 (CET)
Am 10.01.08, 09:43 +0900 schrieb Craig Ringer:
> 2 using Argyll 0.7b7 . If I use dispcal to adjust the gains to target a
> D65 white point I end up with a bright purplish-blue display.
Why D65? Did you try the native monitor whitepoint for a comparision. A
calibration to a different whitepoint is best done in the monitors
hopefully higher bit depth LUT's (10-14 bit per channel).
I would even have expected you to ask for a D50.
kind regards
Kai-Uwe Behrmann
--
developing for colour management
www.behrmann.name + www.oyranos.org
Other related posts:
