Hi Graeme, thanks fro this upgrade.. but
with v.2.1.1 with displaycal I have:
*gabriele@darkstar:~$ dispcal -v -Ibw -d1 -N -H -b100 -t5000 -g2.2
dell_100cd5000kSetting up the instrumentInstrument Type: ColorMunkiSerial
Number: 2012963Firmware version: 288Chip ID:
01-9E6C38120000FEVersion string: 'colormunki FW V1.32 Build Nr.
1303'Calibration Ver.: 6Production No.: 23444dispcal: Warning -
new_dispwin: Expected VideoLUT depth 11 doesn't match actual 10Set
instrument sensor to calibration position, and then hit any key to
continue, or hit Esc or Q to abort: Calibration completePlace instrument on
test window.Hit Esc or Q to give up, any other key to continue:Target white
= 5000.000000 degrees kelvin Daylight spectrumTarget white brightness =
100.000000 cd/m^2Target black brightness = native brightnessTarget
advertised gamma = 2.200000Display adjustment menu:Press 1 .. 71) Black
level (CRT: Offset/Brightness)2) White point (Color temperature, R,G,B,
Gain/Contrast)3) White level (CRT: Gain/Contrast, LCD:
Brightness/Backlight)4) Black point (R,G,B, Offset/Brightness)5) Check
all6) Measure and set ambient for viewing condition adjustment7) Continue
on to calibration8) ExitDoing some initial measurementsMeasured display
update delay of 54 msec, using delay of 172 msec & 0 msec inst
reactionWhite = XYZ 95.152 98.791 81.922Adjust CRT Contrast or LCD
Brightness to get target level. Press space when done. Target 100.00/
Current 98.80 *
with v.2.1.2 with displaycal I have:
*gabriele@darkstar:~$ dispcal -v -Ibw -d1 -N -H -b100 -t5000 -g2.2
dell_100cd5000kSetting up the instrumentInstrument Type: ColorMunkiSerial
Number: 2012963Firmware version: 288Chip ID:
01-9E6C38120000FEVersion string: 'colormunki FW V1.32 Build Nr.
1303'Calibration Ver.: 6Production No.: 23444dispcal: Warning -
new_dispwin: Expected VideoLUT depth 11 doesn't match actual 10Place
instrument on test window.Hit Esc or Q to give up, any other key to
continue:Target white = 5000.000000 degrees kelvin Daylight spectrumTarget
white brightness = 100.000000 cd/m^2Target black brightness = native
brightnessTarget advertised gamma = 2.200000Display adjustment menu:Press 1
.. 71) Black level (CRT: Offset/Brightness)2) White point (Color
temperature, R,G,B, Gain/Contrast)3) White level (CRT: Gain/Contrast, LCD:
Brightness/Backlight)4) Black point (R,G,B, Offset/Brightness)5) Check
all6) Measure and set ambient for viewing condition adjustment7) Continue
on to calibration8) ExitDoing some initial measurements, using delay of 200
msec & 0 msec inst reactionWhite = XYZ 0.015 0.016 0.013Adjust CRT
Contrast or LCD Brightness to get target level. Press space when done.
Target 100.00\ Current 0.02 *
If I turn OFF the -H switch I can read display brightness:
*gabriele@darkstar:~$ dispcal -v -Ibw -d1 -N -b100 -t5000 -g2.2
dell_100cd5000kSetting up the instrumentInstrument Type: ColorMunkiSerial
Number: 2012963Firmware version: 288Chip ID:
01-9E6C38120000FEVersion string: 'colormunki FW V1.32 Build Nr.
1303'Calibration Ver.: 6Production No.: 23444dispcal: Warning -
new_dispwin: Expected VideoLUT depth 11 doesn't match actual 10Set
instrument sensor to calibration position, and then hit any key to
continue, or hit Esc or Q to abort: Calibration completePlace instrument on
test window.Hit Esc or Q to give up, any other key to continue:Target white
= 5000.000000 degrees kelvin Daylight spectrumTarget white brightness =
100.000000 cd/m^2Target black brightness = native brightnessTarget
advertised gamma = 2.200000Display adjustment menu:Press 1 .. 71) Black
level (CRT: Offset/Brightness)2) White point (Color temperature, R,G,B,
Gain/Contrast)3) White level (CRT: Gain/Contrast, LCD:
Brightness/Backlight)4) Black point (R,G,B, Offset/Brightness)5) Check
all6) Measure and set ambient for viewing condition adjustment7) Continue
on to calibration8) ExitDoing some initial measurementsMeasured display
update delay of 61 msec, using delay of 181 msec & 0 msec inst
reactionWhite = XYZ 95.359 98.737 81.570Adjust CRT Contrast or LCD
Brightness to get target level. Press space when done. Target 100.00\
Current 98.73*
Any hint?
Il giorno mer 15 gen 2020 alle ore 02:34 Graeme Gill <graeme@xxxxxxxxxxxxx>
ha scritto:
I'm pleased to announce the release of ArgyllCMS V2.1.2
A summary of changes is here <
https://www.argyllcms.com/doc/ChangesSummary.html>
Downloads are in the usual place: <https://www.argyllcms.com/#Downloads>
Let me know if you find anything amiss.
Enjoy!
Graeme Gill.