Hi Graeme,
with
spotread -H
on a white paper I have
Place instrument on spot to be measured,
and hit [A-Z] to read white and setup FWA compensation (keyed to letter)
[a-z] to read and make FWA compensated reading from keyed reference
'r' to set reference, 's' to save spectrum,
'f' to report cal. refresh rate, 'F' to measure refresh rate
'h' to toggle high res., 'k' to do a calibration
Hit ESC or Q to exit, instrument switch or any other key to take a reading:
Result is XYZ: 1.473438 1.501497 1.314649, D50 Lab: 12.617572 0.725369
-0.989940
I think did as you said :-)
On 2020-04-29 01:35, Graeme Gill wrote:
can you reproduce the problem using spotread ?