analogorgans Digest Mon, 02 Oct 2006 Volume: 03 Issue: 026
In This Issue:
[analogorgans] Hi, Group - need help
[analogorgans] Re: Hi, Group - need help
[analogorgans] Re: Hi, Group - need help
[analogorgans] Re: Hi, Group - need help
[analogorgans] Re: Hi, Group - need help
[analogorgans] Re: Hi, Group - need help
[analogorgans] Re: (No In-Reply-To: <524.720ae5d5.32532439@a
[analogorgans] Re: Hi, Group - need help
----------------------------------------------------------------------
From: RGrauman@xxxxxxx
Date: Mon, 2 Oct 2006 12:06:23 EDT
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree,
please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost
goes away for a few seconds, but then it comes back. I had a Leslie guy
come
out, b/c I thought it was that, but no - the Leslie is quiet as a mouse.
So,
something's wrong with the organ. The closest repair folks are 1.5 hours
away
and it will cost me $400 to have them just come down and scratch their
chins, so I'm hoping someone out there might be able to help me at least
diagnose
what's going on here, step-by-step. So far I've lifted the lid and
checked
the fuse. No problems there. Any more ideas? Please help. I'm desperate.
HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
------------------------------
From: "Ken Fedorick" <kfedorick@xxxxxxxxxx>
Subject: [analogorgans] Re: Hi, Group - need help
Date: Mon, 2 Oct 2006 10:23:44 -0600
Ronnie,
One quick and dirty thing you might try is to get some contact
cleaner (radio shack). Disconnect the power from the wall. Remove the
Leslie cable from the back of the organ and spray the plug and socket.
Plug
and remove the leslie cable a couple of times. Do the same thing on the
Leslie end of the cable. Give it a little time to dry and then see how it
works.
Another possibility is the volume control on the Leslie. Mark
its location on the chassis then moves it back and forth a few times and
see
if that helps. From that point, we would need to get inside the organ and
see if the pots for the output are dirty.
Question, does the static noise start when you turn the organ
on
and continues until you turn it off or do you have to do something to make
it happen, like move the expression shoe, certain voices have to be used,
or
some other thing need to happen? Did this just start happening or has it
done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost goes away for a few seconds, but then it comes back. I had a Leslie
guy come out, b/c I thought it was that, but no - the Leslie is quiet as a
mouse. So, something's wrong with the organ. The closest repair folks are
1.5 hours away and it will cost me $400 to have them just come down and
scratch their chins, so I'm hoping someone out there might be able to help
me at least diagnose what's going on here, step-by-step. So far I've
lifted
the lid and checked the fuse. No problems there. Any more ideas? Please
help. I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
------------------------------
Subject: [analogorgans] Re: Hi, Group - need help
Date: Mon, 02 Oct 2006 14:34:44 -0400
From: rgrauman@xxxxxxx
Hi, Kenneth -
Thanks for your reply. I will stop by a Radio Shack on my way home tonight
and try the cleaning suggestions.
The static starts as soon as I turn the organ on. Or, as soon as it "warms
up" or whatever - within a couple seconds of turning it on. Nothing I do
(expression shoe, changing voicing, jumping around, etc.) has any effect
on the static. It has a mind of it's own. It has slowly worsened over
time, in that on occasion in the past, I have turned on the organ and
there was some static. But when I turned it off, let it sit a minute, and
turned it back on again, it was gone. Not so anymore. And it is really
deafening now.
Another malady I have noticed recently (before the static thing became
constant last week and the organ became pretty much unplayable) which may
or may not be related is that after I have been playing for a while (1/2
hour perhaps?), sometimes everything dies - softer and softer and softer
and then nothing. I turn off, then on again, and everything is fine
indefinitely.
I'll let you know the results of the cleaning.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 12:23 PM
Subject: [analogorgans] Re: Hi, Group - need help
Ronnie,
One quick and dirty thing you might try is to get some contact
cleaner (radio shack). Disconnect the power from the wall. Remove the
Leslie cable from the back of the organ and spray the plug and socket.
Plug and remove the leslie cable a couple of times. Do the same thing on
the Leslie end of the cable. Give it a little time to dry and then see
how it works.
Another possibility is the volume control on the Leslie. Mark
its location on the chassis then moves it back and forth a few times and
see if that helps. From that point, we would need to get inside the organ
and see if the pots for the output are dirty.
Question, does the static noise start when you turn the organ
on and continues until you turn it off or do you have to do something to
make it happen, like move the expression shoe, certain voices have to be
used, or some other thing need to happen? Did this just start happening
or has it done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost goes away for a few seconds, but then it comes back. I had a Leslie
guy come out, b/c I thought it was that, but no - the Leslie is quiet as a
mouse. So, something's wrong with the organ. The closest repair folks are
1.5 hours away and it will cost me $400 to have them just come down and
scratch their chins, so I'm hoping someone out there might be able to help
me at least diagnose what's going on here, step-by-step. So far I've
lifted the lid and checked the fuse. No problems there. Any more ideas?
Please help. I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
------------------------------
From: "Ken Fedorick" <kfedorick@xxxxxxxxxx>
Subject: [analogorgans] Re: Hi, Group - need help
Date: Mon, 2 Oct 2006 13:59:57 -0600
Is the Leslie your only channel? Do other channels have the same problem?
It sounds like it could be an amp or a preamp.
I have a Rodgers 340 and a Deseret 115 but I am not familiar with the 110
layout.
A friend has a Rodgers 36E. He has had problems with static and fading
which was caused by the output pots before the amps. Mostly this was
caused by dirt in the pots. I was able to tear them down and clean them.
Not recommended for the faint of heart.
----- Original Message -----
From: rgrauman@xxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Monday, October 02, 2006 12:34 PM
Subject: [analogorgans] Re: Hi, Group - need help
Hi, Kenneth -
Thanks for your reply. I will stop by a Radio Shack on my way home
tonight and try the cleaning suggestions.
The static starts as soon as I turn the organ on. Or, as soon as it
"warms up" or whatever - within a couple seconds of turning it on. Nothing
I do (expression shoe, changing voicing, jumping around, etc.) has any
effect on the static. It has a mind of it's own. It has slowly worsened
over time, in that on occasion in the past, I have turned on the organ and
there was some static. But when I turned it off, let it sit a minute, and
turned it back on again, it was gone. Not so anymore. And it is really
deafening now.
Another malady I have noticed recently (before the static thing became
constant last week and the organ became pretty much unplayable) which may
or may not be related is that after I have been playing for a while (1/2
hour perhaps?), sometimes everything dies - softer and softer and softer
and then nothing. I turn off, then on again, and everything is fine
indefinitely.
I'll let you know the results of the cleaning.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 12:23 PM
Subject: [analogorgans] Re: Hi, Group - need help
Ronnie,
One quick and dirty thing you might try is to get some
contact cleaner (radio shack). Disconnect the power from the wall.
Remove the Leslie cable from the back of the organ and spray the plug and
socket. Plug and remove the leslie cable a couple of times. Do the same
thing on the Leslie end of the cable. Give it a little time to dry and
then see how it works.
Another possibility is the volume control on the Leslie.
Mark its location on the chassis then moves it back and forth a few times
and see if that helps. From that point, we would need to get inside the
organ and see if the pots for the output are dirty.
Question, does the static noise start when you turn the organ
on and continues until you turn it off or do you have to do something to
make it happen, like move the expression shoe, certain voices have to be
used, or some other thing need to happen? Did this just start happening
or has it done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost goes away for a few seconds, but then it comes back. I had a Leslie
guy come out, b/c I thought it was that, but no - the Leslie is quiet as a
mouse. So, something's wrong with the organ. The closest repair folks are
1.5 hours away and it will cost me $400 to have them just come down and
scratch their chins, so I'm hoping someone out there might be able to help
me at least diagnose what's going on here, step-by-step. So far I've
lifted the lid and checked the fuse. No problems there. Any more ideas?
Please help. I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
------------------------------------------------------------------------------
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
------------------------------
Subject: [analogorgans] Re: Hi, Group - need help
Date: Mon, 02 Oct 2006 16:08:18 -0400
From: rgrauman@xxxxxxx
Um, well, the Leslie is the only thing I have hooked up... I'm not sure
about channels... how would I check?
The dirt-in-the-pots diagnosis sounds rather promising. If the cleaning
doesn't work, I'd like to try that, if you could possibly give me
step-by-step directions. I'll keep you posted.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 3:59 PM
Subject: [analogorgans] Re: Hi, Group - need help
Is the Leslie your only channel? Do other channels have the same problem?
It sounds like it could be an amp or a preamp.
I have a Rodgers 340 and a Deseret 115 but I am not familiar with the 110
layout.
A friend has a Rodgers 36E. He has had problems with static and fading
which was caused by the output pots before the amps. Mostly this was
caused by dirt in the pots. I was able to tear them down and clean them.
Not recommended for the faint of heart.
----- Original Message -----
From: rgrauman@xxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Monday, October 02, 2006 12:34 PM
Subject: [analogorgans] Re: Hi, Group - need help
Hi, Kenneth -
Thanks for your reply. I will stop by a Radio Shack on my way home tonight
and try the cleaning suggestions.
The static starts as soon as I turn the organ on. Or, as soon as it "warms
up" or whatever - within a couple seconds of turning it on. Nothing I do
(expression shoe, changing voicing, jumping around, etc.) has any effect
on the static. It has a mind of it's own. It has slowly worsened over
time, in that on occasion in the past, I have turned on the organ and
there was some static. But when I turned it off, let it sit a minute, and
turned it back on again, it was gone. Not so anymore. And it is really
deafening now.
Another malady I have noticed recently (before the static thing became
constant last week and the organ became pretty much unplayable) which may
or may not be related is that after I have been playing for a while (1/2
hour perhaps?), sometimes everything dies - softer and softer and softer
and then nothing. I turn off, then on again, and everything is fine
indefinitely.
I'll let you know the results of the cleaning.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 12:23 PM
Subject: [analogorgans] Re: Hi, Group - need help
Ronnie,
One quick and dirty thing you might try is to get some contact
cleaner (radio shack). Disconnect the power from the wall. Remove the
Leslie cable from the back of the organ and spray the plug and socket.
Plug and remove the leslie cable a couple of times. Do the same thing on
the Leslie end of the cable. Give it a little time to dry and then see
how it works.
Another possibility is the volume control on the Leslie. Mark
its location on the chassis then moves it back and forth a few times and
see if that helps. From that point, we would need to get inside the organ
and see if the pots for the output are dirty.
Question, does the static noise start when you turn the organ
on and continues until you turn it off or do you have to do something to
make it happen, like move the expression shoe, certain voices have to be
used, or some other thing need to happen? Did this just start happening
or has it done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost goes away for a few seconds, but then it comes back. I had a Leslie
guy come out, b/c I thought it was that, but no - the Leslie is quiet as a
mouse. So, something's wrong with the organ. The closest repair folks are
1.5 hours away and it will cost me $400 to have them just come down and
scratch their chins, so I'm hoping someone out there might be able to help
me at least diagnose what's going on here, step-by-step. So far I've
lifted the lid and checked the fuse. No problems there. Any more ideas?
Please help. I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
------------------------------
From: RGrauman@xxxxxxx
Date: Mon, 2 Oct 2006 22:26:01 EDT
Subject: [analogorgans] Re: Hi, Group - need help
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Okay, well, I cleaned a bunch of stuff where the organ connects to the
Leslie and to power and hooked everything back up and there is no change.
:( So,
if anyone is willing to give me step-by-step directions on how to clean
the
pots, I'm totally game. I even took photos of the amplifier and posted
them on
shutterfly.com incase that will give you an idea of the innards of my
particular organ.
_share.shutterfly.com/action/welcome?sid=8AbNGzNm4ctWMe_
(http://share.shutterfly.com/action/welcome?sid=8AbNGzNm4ctWMe¬ag=1)
-- Attached file included as plaintext by Ecartis --
Return-Path: <rgrauman@xxxxxxx>
Received: from mblk-d42 (mblk-d42.mblk.aol.com [205.188.212.226]) by
ciaaol-m04.mx.aol.com (v112_r1.5) with ESMTP id
MAILCIAAOLM043-ec3e452171b23a7; Mon, 02 Oct 2006 16:08:18 -0400
References: <8C8B46890D763A5-1178-1AD0@xxxxxxxxxxxxxxxxxxxxxxx>
<000b01c6e65d$56ebaa70$0500a8c0@PRESARIO>
To: analogorgans@xxxxxxxxxxxxx
Subject: Re: [analogorgans] Re: Hi, Group - need help
Date: Mon, 02 Oct 2006 16:08:18 -0400
In-Reply-To: <000b01c6e65d$56ebaa70$0500a8c0@PRESARIO>
X-MB-Message-Source: WebUI
MIME-Version: 1.0
From: rgrauman@xxxxxxx
X-MB-Message-Type: User
Content-Type: multipart/alternative;
boundary="--------MailBlocks_8C8B475A33D2924_9B8_F4E_mblk-d42.sysops.aol.com"
X-Mailer: AOL WebMail 20221
Received: from 199.196.144.17 by mblk-d42.sysops.aol.com (205.188.212.226)
with HTTP (WebMailUI); Mon, 02 Oct 2006 16:08:18 -0400
Message-Id: <8C8B475A33F8B7D-9B8-7CA@xxxxxxxxxxxxxxxxxxxxxxx>
X-AOL-IP: 205.188.212.226
----------MailBlocks_8C8B475A33D2924_9B8_F4E_mblk-d42.sysops.aol.com
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="us-ascii"
Um, well, the Leslie is the only thing I have hooked up... I'm not sure
about channels... how would I check?
The dirt-in-the-pots diagnosis sounds rather promising. If the cleaning
doesn't work, I'd like to try that, if you could possibly give me
step-by-step directions. I'll keep you posted.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 3:59 PM
Subject: [analogorgans] Re: Hi, Group - need help
Is the Leslie your only channel? Do other channels have the same problem?
It sounds like it could be an amp or a preamp.
I have a Rodgers 340 and a Deseret 115 but I am not familiar with the 110
layout.
A friend has a Rodgers 36E. He has had problems with static and fading
which was caused by the output pots before the amps. Mostly this was
caused by dirt in the pots. I was able to tear them down and clean them.
Not recommended for the faint of heart.
----- Original Message -----
From: rgrauman@xxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Monday, October 02, 2006 12:34 PM
Subject: [analogorgans] Re: Hi, Group - need help
Hi, Kenneth -
Thanks for your reply. I will stop by a Radio Shack on my way home tonight
and try the cleaning suggestions.
The static starts as soon as I turn the organ on. Or, as soon as it "warms
up" or whatever - within a couple seconds of turning it on. Nothing I do
(expression shoe, changing voicing, jumping around, etc.) has any effect
on the static. It has a mind of it's own. It has slowly worsened over
time, in that on occasion in the past, I have turned on the organ and
there was some static. But when I turned it off, let it sit a minute, and
turned it back on again, it was gone. Not so anymore. And it is really
deafening now.
Another malady I have noticed recently (before the static thing became
constant last week and the organ became pretty much unplayable) which may
or may not be related is that after I have been playing for a while (1/2
hour perhaps?), sometimes everything dies - softer and softer and softer
and then nothing. I turn off, then on again, and everything is fine
indefinitely.
I'll let you know the results of the cleaning.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 12:23 PM
Subject: [analogorgans] Re: Hi, Group - need help
Ronnie,
One quick and dirty thing you might try is to get some contact
cleaner (radio shack). Disconnect the power from the wall. Remove the
Leslie cable from the back of the organ and spray the plug and socket.
Plug and remove the leslie cable a couple of times. Do the same thing on
the Leslie end of the cable. Give it a little time to dry and then see
how it works.
Another possibility is the volume control on the Leslie. Mark
its location on the chassis then moves it back and forth a few times and
see if that helps. From that point, we would need to get inside the organ
and see if the pots for the output are dirty.
Question, does the static noise start when you turn the organ
on and continues until you turn it off or do you have to do something to
make it happen, like move the expression shoe, certain voices have to be
used, or some other thing need to happen? Did this just start happening
or has it done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up the
wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie. It
sounds like the scratchiest old record player you ever heard. Sometimes it
almost goes away for a few seconds, but then it comes back. I had a Leslie
guy come out, b/c I thought it was that, but no - the Leslie is quiet as a
mouse. So, something's wrong with the organ. The closest repair folks are
1.5 hours away and it will cost me $400 to have them just come down and
scratch their chins, so I'm hoping someone out there might be able to help
me at least diagnose what's going on here, step-by-step. So far I've
lifted the lid and checked the fuse. No problems there. Any more ideas?
Please help. I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
----------MailBlocks_8C8B475A33D2924_9B8_F4E_mblk-d42.sysops.aol.com
Content-Transfer-Encoding: 7bit
Content-Type: text/html; charset="us-ascii"
<HTML><BODY>
<div>Um, well, the Leslie is the only thing I have hooked up... I'm not
sure about channels... how would I check?</div>
<div> </div>
<div>The dirt-in-the-pots diagnosis sounds rather promising. If the
cleaning doesn't work, I'd like to try that, if you could possibly
give me step-by-step directions. I'll keep you posted.</div>
<div> </div>
<div>~Ronnie </div>
<br>
-----Original Message-----<br>
From: kfedorick@xxxxxxxxxx<br>
To: analogorgans@xxxxxxxxxxxxx<br>
Sent: Mon, 2 Oct 2006 3:59 PM<br>
Subject: [analogorgans] Re: Hi, Group - need help<br>
<br>
<STYLE>
.AOLPlainTextBody {
margin: 0px;
font-family: Tahoma, Verdana, Arial, Sans-Serif;
font-size: 12px;
color: #000;
background-color: #fff;
}
.AOLPlainTextBody pre {
font-size: 9pt;
}
.AOLInlineAttachment {
margin: 10px;
}
.AOLAttachmentHeader {
font: 11px arial;
border: 1px solid #7DA8D4;
background: #F9F9F9;
}
.AOLAttachmentHeader .Title {
font: 11px arial;
background: #B5DDFA;
padding: 3px 3px 3px 3px;
}
.AOLAttachmentHeader .FieldLabel {
font: 11px arial;
color: #000000;
padding: 1px 10px 1px 9px;
background: #F9F9F9;
}
.AOLAttachmentHeader .FieldValue {
font: 11px arial;
color: #000000;
background: #F9F9F9;
}
.AOLAttachmentHeader a, .AOLImage a {
color: #2864B4;
text-decoration: none;
}
.AOLAttachmentHeader a:hover, .AOLImage a:hover {
color: #2864B4;
text-decoration: underline;
}
body {
background-color: white;
font-family: "Verdana";
font-size: 10pt;
border: 0px;
}
p {
margin: 0px;
padding: 0px;
}
img.managedImg {
width: 0px;
height: 0px;
}
img.placeholder {
width: 275px;
height: 206px;
background: #F4F4F4 center center no-repeat;
border: 1px solid #DADAD6 !important;
}
</STYLE>
<div id=AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac>
<div><FONT face=Arial>Is the Leslie your only channel? Do other
channels have the same problem? It sounds like it could be an amp or
a preamp. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>I have a Rodgers 340 and a Deseret 115 but I am not
familiar with the 110 layout. </FONT></div>
<div><FONT face=Arial></FONT> </div>
<div><FONT face=Arial>A friend has a Rodgers 36E. He has had
problems with static and fading which was caused by the output pots before
the amps. Mostly this was caused by dirt in the pots. I was
able to tear them down and clean them. Not recommended for the faint
of heart. </FONT></div>
<BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px;
MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<div style="FONT: 10pt arial">----- Original Message ----- </div>
<div style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color:
black"><B>From:</B> <A title=rgrauman@xxxxxxx
href="javascript:parent.ComposeTo('rgrauman@xxxxxxx',
'');">rgrauman@xxxxxxx</A> </div>
<div style="FONT: 10pt arial"><B>To:</B> <A
title=analogorgans@xxxxxxxxxxxxx
href="javascript:parent.ComposeTo('analogorgans@xxxxxxxxxxxxx',
'');">analogorgans@xxxxxxxxxxxxx</A> </div>
<div style="FONT: 10pt arial"><B>Sent:</B> Monday, October 02, 2006 12:34
PM</div>
<div style="FONT: 10pt arial"><B>Subject:</B> [analogorgans] Re: Hi,
Group - need help</div>
<div><br>
</div>
<div>Hi, Kenneth -</div>
<div>Thanks for your reply. I will stop by a Radio Shack on my way home
tonight and try the cleaning suggestions.</div>
<div>The static starts as soon as I turn the organ on. Or, as soon as it
"warms up" or whatever - within a couple seconds of turning it on. Nothing
I do (expression shoe, changing voicing, jumping around, etc.) has any
effect on the static. It has a mind of it's own. It has slowly worsened
over time, in that on occasion in the past, I have turned on the organ and
there was some static. But when I turned it off, let it sit a minute, and
turned it back on again, it was gone. Not so anymore. And it is really
deafening now.</div>
<div>Another malady I have noticed recently (before the static thing
became constant last week and the organ became pretty much unplayable)
which may or may not be related is that after I have been playing for a
while (1/2 hour perhaps?), sometimes everything dies - softer and softer
and softer and then nothing. I turn off, then on again, and everything is
fine indefinitely.</div>
<div>I'll let you know the results of the cleaning.</div>
<div>~Ronnie</div>
<br>
-----Original Message-----<br>
From: kfedorick@xxxxxxxxxx<br>
To: analogorgans@xxxxxxxxxxxxx<br>
Sent: Mon, 2 Oct 2006 12:23 PM<br>
Subject: [analogorgans] Re: Hi, Group - need help<br>
<br>
<STYLE>#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLPlainTextBody { FONT-SIZE: 12px; MARGIN: 0px; COLOR: #000;
FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; BACKGROUND-COLOR:
#fff}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac .AOLPlainTextBody
PRE { FONT-SIZE: 9pt}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLInlineAttachment { MARGIN:
10px}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader { BORDER-RIGHT: #7da8d4 1px solid; BORDER-TOP:
#7da8d4 1px solid; BACKGROUND: #f9f9f9; FONT: 11px arial; BORDER-LEFT:
#7da8d4 1px solid; BORDER-BOTTOM: #7da8d4 1px
solid}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader .Title { PADDING-RIGHT: 3px; PADDING-LEFT: 3px;
BACKGROUND: #b5ddfa; PADDING-BOTTOM: 3px; FONT: 11px arial; PADDING-TOP:
3px}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader .FieldLabel { PADDING-RIGHT: 10px; PADDING-LEFT:
9px; BACKGROUND: #f9f9f9; PADDING-BOTTOM:
1px; FONT: 11px arial; COLOR: #000000; PADDING-TOP:
1px}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader .FieldValue { BACKGROUND: #f9f9f9; FONT: 11px
arial; COLOR: #000000}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader A { COLOR: #2864b4; TEXT-DECORATION:
none}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac .AOLImage A {
COLOR: #2864b4; TEXT-DECORATION:
none}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac
.AOLAttachmentHeader A:hover { COLOR: #2864b4; TEXT-DECORATION:
underline}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac .AOLImage
A:hover { COLOR: #2864b4; TEXT-DECORATION:
underline}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac BODY {
BORDER-RIGHT: 0px; BORDER-TOP: 0px; FONT-SIZE: 10pt; BORDER-LEFT: 0px;
BORDER-BOTTOM: 0px; FONT-FAMILY: "Verdana"; BACKGROUND-COLOR:
white}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac P {
PADDING-RIGHT: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARG
IN: 0px; PADDING-TOP:
0px}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac IMG.managedImg
{ WIDTH: 0px; HEIGHT:
0px}#AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac IMG.placeholder
{ BORDER-RIGHT: #dadad6 1px solid; BORDER-TOP: #dadad6 1px solid;
BACKGROUND: #f4f4f4 no-repeat center center; BORDER-LEFT: #dadad6 1px
solid; WIDTH: 275px; BORDER-BOTTOM: #dadad6 1px solid; HEIGHT:
206px}</STYLE>
<div id=AOLMsgPart_2_f486a6d6-e264-41e0-8b8b-b64d978b1728>
<STYLE></STYLE>
<div class=Section1>
<div class=MsoNormal><FONT id=role_document face=Arial color=navy
size=2><SPAN style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">Ronnie,</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">
One quick and dirty thing you might try is to get some contact cleaner
(radio shack). Disconnect the power from the wall. Remove the
Leslie cable from the back of the organ and spray the plug and
socket. Plug and remove the leslie cable a couple of times. Do
the same thing on the Leslie end of the cable. Give it a little time
to dry and then see how it works. </SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"></SPAN></FONT> </div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">
Another possibility is the volume control on the Leslie. Mark its
location on the chassis then moves it back and forth a few times and see
if that helps. From that point, we would need to get inside the
organ and see if the pots for the output are dirty.
</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"></SPAN></FONT> </div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial">
Question, does the static noise start when you turn the organ on and
continues until you turn it off or do you have to do something to make it
happen, like move the expression shoe, certain voices have to be used, or
some other thing need to happen? Did this just start happening or
has it done this over time?</SPAN></FONT></div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"></SPAN></FONT> </div>
<div>
<div class=MsoAutoSig><FONT face="Times New Roman" color=navy size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: navy">Kenneth W.
Fedorick</SPAN></FONT></div>
<div class=MsoAutoSig><FONT face="Times New Roman" color=navy size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: navy">1529 West Taylor
Road</SPAN></FONT></div>
<div class=MsoAutoSig><FONT face="Times New Roman" color=navy size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: navy">Las Cruces, NM
88007-5545</SPAN></FONT></div>
<div class=MsoAutoSig><FONT face="Times New Roman" color=navy size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: navy">(505) 526-5803
Home</SPAN></FONT></div>
<div class=MsoAutoSig><FONT face="Times New Roman" color=navy size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: navy">(505) 644-9483
Cell</SPAN></FONT></div>
</div>
<div class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY:
Arial"></SPAN></FONT> </div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Tahoma
size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">-----Original
Message-----<br>
<B><SPAN style="FONT-WEIGHT: bold">From:</SPAN></B>
analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] <B><SPAN style="FONT-WEIGHT:
bold">On Behalf Of </SPAN></B>RGrauman@xxxxxxx<br>
<B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Monday, October 02,
2006 10:06 AM<br>
<B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
analogorgans@xxxxxxxxxxxxx<br>
<B><SPAN style="FONT-WEIGHT: bold">Subject:</SPAN></B> [analogorgans] Hi,
Group - need help</SPAN></FONT></div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face="Times New
Roman" size=3><SPAN style="FONT-SIZE: 12pt"></SPAN></FONT> </div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial">Hi. I'm new to this "free lists" thing and I don't
know what all the protocols are or if I'm even on the right list, so if
I'm barking up the wrong tree, please redirect me...</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial"></SPAN></FONT> </div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial">Here's the story: I have a Rodgers 110. It's hooked up
to a Leslie. It sounds like the scratchiest old record player you ever
heard. Sometimes it almost goes away for a few seconds, but then it
comes back. I had a Leslie guy come out, b/c I thought it was that, but
no - the Leslie is quiet as a mouse. So, something's wrong with the organ.
The closest repair folks are 1.5 hours away and it will cost me $400 to
have them just come down and scratch their chins, so I'm hoping someone
out there might be able to help me at least diagnose what's going on here,
step-by-step. So far I've lifted the lid and checked the fuse. No problems
there. Any more ideas? Please help. I'm desperate. HUUUUUGE audition on
the 12th.</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial"></SPAN></FONT> </div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial">Thanks...</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial"></SPAN></FONT> </div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial">~Ronnie</SPAN></FONT></div>
</div>
<div>
<div class=MsoNormal style="MARGIN-LEFT: 0.5in"><FONT face=Arial
color=black size=2><SPAN style="FONT-SIZE: 10pt; COLOR: black;
FONT-FAMILY: Arial"></SPAN></FONT> </div>
</div>
</div>
</div>
<div class=AOLPromoFooter>
<HR style="MARGIN-TOP: 10px">
<A
href="http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom%2Fnewaol";
target=_blank><B>Check out the new AOL</B></A>. Most comprehensive set of
free safety and security tools, free access to millions of high-quality
videos from across the web, free AOL Mail and more.<br>
</div>
</BLOCKQUOTE></div>
<!-- end of
AOLMsgPart_2_7dabc9b4-da66-4da0-b347-0a1faeced3ac --></BODY></HTML>
----------MailBlocks_8C8B475A33D2924_9B8_F4E_mblk-d42.sysops.aol.com--
------------------------------
Date: Mon, 02 Oct 2006 20:39:18 -0700
From: Robert Lemon <lemon1@xxxxxxxxxxx>
Subject: [analogorgans] Re: (No In-Reply-To:
<524.720ae5d5.32532439@xxxxxxx>
You haven't mentioned power supply voltages. If you have a meter how
do they look. My guess would be that you have components giving out.
Whether it is one or more capacitors or the power transistors, you
will not be able to find out without a meter.
At 07:26 PM 10/2/2006, you wrote:
Okay, well, I cleaned a bunch of stuff where the organ connects to
the Leslie and to power and hooked everything back up and there is
no change. :( So, if anyone is willing to give me step-by-step
directions on how to clean the pots, I'm totally game. I even took
photos of the amplifier and posted them on shutterfly.com incase
that will give you an idea of the innards of my particular organ.
<http://share.shutterfly.com/action/welcome?sid=8AbNGzNm4ctWMe¬ag=1>share.shutterfly.com/action/welcome?sid=8AbNGzNm4ctWMe
Return-Path: <rgrauman@xxxxxxx>
Received: from mblk-d42 (mblk-d42.mblk.aol.com [205.188.212.226])
by ciaaol-m04.mx.aol.com (v112_r1.5) with ESMTP id
MAILCIAAOLM043-ec3e452171b23a7; Mon, 02 Oct 2006 16:08:18 -0400
References: <8C8B46890D763A5-1178-1AD0@xxxxxxxxxxxxxxxxxxxxxxx>
<000b01c6e65d$56ebaa70$0500a8c0@PRESARIO>
To: analogorgans@xxxxxxxxxxxxx
Subject: Re: [analogorgans] Re: Hi, Group - need help
Date: Mon, 02 Oct 2006 16:08:18 -0400
In-Reply-To: <000b01c6e65d$56ebaa70$0500a8c0@PRESARIO>
X-MB-Message-Source: WebUI
MIME-Version: 1.0
From: rgrauman@xxxxxxx
X-MB-Message-Type: User
Content-Type: multipart/alternative;
boundary="--------MailBlocks_8C8B475A33D2924_9B8_F4E_mblk-d42.sysops.aol.com"
X-Mailer: AOL WebMail 20221
Received: from 199.196.144.17 by mblk-d42.sysops.aol.com
(205.188.212.226) with HTTP (WebMailUI); Mon, 02 Oct 2006 16:08:18 -0400
Message-Id: <8C8B475A33F8B7D-9B8-7CA@xxxxxxxxxxxxxxxxxxxxxxx>
X-AOL-IP: 205.188.212.226
Um, well, the Leslie is the only thing I have hooked up... I'm not
sure about channels... how would I check?
The dirt-in-the-pots diagnosis sounds rather promising. If the
cleaning doesn't work, I'd like to try that, if you could possibly
give me step-by-step directions. I'll keep you posted.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 3:59 PM
Subject: [analogorgans] Re: Hi, Group - need help
Is the Leslie your only channel? Do other channels have the same
problem? It sounds like it could be an amp or a preamp.
I have a Rodgers 340 and a Deseret 115 but I am not familiar with
the 110 layout.
A friend has a Rodgers 36E. He has had problems with static and
fading which was caused by the output pots before the amps. Mostly
this was caused by dirt in the pots. I was able to tear them down
and clean them. Not recommended for the faint of heart.
----- Original Message -----
From: rgrauman@xxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Monday, October 02, 2006 12:34 PM
Subject: [analogorgans] Re: Hi, Group - need help
Hi, Kenneth -
Thanks for your reply. I will stop by a Radio Shack on my way home
tonight and try the cleaning suggestions.
The static starts as soon as I turn the organ on. Or, as soon as it
"warms up" or whatever - within a couple seconds of turning it on.
Nothing I do (expression shoe, changing voicing, jumping around,
etc.) has any effect on the static. It has a mind of it's own. It
has slowly worsened over time, in that on occasion in the past, I
have turned on the organ and there was some static. But when I
turned it off, let it sit a minute, and turned it back on again, it
was gone. Not so anymore. And it is really deafening now.
Another malady I have noticed recently (before the static thing
became constant last week and the organ became pretty much
unplayable) which may or may not be related is that after I have
been playing for a while (1/2 hour perhaps?), sometimes everything
dies - softer and softer and softer and then nothing. I turn off,
then on again, and everything is fine indefinitely.
I'll let you know the results of the cleaning.
~Ronnie
-----Original Message-----
From: kfedorick@xxxxxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Mon, 2 Oct 2006 12:23 PM
Subject: [analogorgans] Re: Hi, Group - need help
Ronnie,
One quick and dirty thing you might try is to get some
contact cleaner (radio shack). Disconnect the power from the
wall. Remove the Leslie cable from the back of the organ and spray
the plug and socket. Plug and remove the leslie cable a couple of
times. Do the same thing on the Leslie end of the cable. Give it
a little time to dry and then see how it works.
Another possibility is the volume control on the
Leslie. Mark its location on the chassis then moves it back and
forth a few times and see if that helps. From that point, we would
need to get inside the organ and see if the pots for the output are
dirty.
Question, does the static noise start when you turn the
organ on and continues until you turn it off or do you have to do
something to make it happen, like move the expression shoe, certain
voices have to be used, or some other thing need to happen? Did
this just start happening or has it done this over time?
Kenneth W. Fedorick
1529 West Taylor Road
Las Cruces, NM 88007-5545
(505) 526-5803 Home
(505) 644-9483 Cell
-----Original Message-----
From: analogorgans-bounce@xxxxxxxxxxxxx
[mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of RGrauman@xxxxxxx
Sent: Monday, October 02, 2006 10:06 AM
To: analogorgans@xxxxxxxxxxxxx
Subject: [analogorgans] Hi, Group - need help
Hi. I'm new to this "free lists" thing and I don't know what all the
protocols are or if I'm even on the right list, so if I'm barking up
the wrong tree, please redirect me...
Here's the story: I have a Rodgers 110. It's hooked up to a Leslie.
It sounds like the scratchiest old record player you ever heard.
Sometimes it almost goes away for a few seconds, but then it comes
back. I had a Leslie guy come out, b/c I thought it was that, but no
- the Leslie is quiet as a mouse. So, something's wrong with the
organ. The closest repair folks are 1.5 hours away and it will cost
me $400 to have them just come down and scratch their chins, so I'm
hoping someone out there might be able to help me at least diagnose
what's going on here, step-by-step. So far I've lifted the lid and
checked the fuse. No problems there. Any more ideas? Please help.
I'm desperate. HUUUUUGE audition on the 12th.
Thanks...
~Ronnie
----------
<http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom%2Fnewaol>Check
out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across
the web, free AOL Mail and more.
------------------------------
From: "Bernie Arcand" <barcand@xxxxxxxxxx>
Subject: [analogorgans] Re: Hi, Group - need help
Date: Mon, 2 Oct 2006 23:00:40 -0500
Do you have a voltmeter...perhaps even a cheapy digital with which to
measure the power supply voltages? Perhaps a sagging voltage, either 12+
or 12- or maybe even the 30+ or - could cause these problems. I know the
Cambridge 220 is a whole different beast, but when one of the volatges in
my power supply went bad, it sounded like a jet engine at full volume.
Just a thought.
Bernie in ND
----- Original Message -----
From: RGrauman@xxxxxxx
To: analogorgans@xxxxxxxxxxxxx
Sent: Monday, October 02, 2006 9:26 PM
Subject: [analogorgans] Re: Hi, Group - need help
Okay, well, I cleaned a bunch of stuff where the organ connects to the
Leslie and to power and hooked everything back up and there is no change.
:( So, if anyone is willing to give me step-by-step directions on how to
clean the pots, I'm totally game. I even took photos of the amplifier and
posted them on shutterfly.com incase that will give you an idea of the
innards of my particular organ.
share.shutterfly.com/action/welcome?sid=8AbNGzNm4ctWMe
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.12.11/460 - Release Date:
10/1/2006
------------------------------
End of analogorgans Digest V3 #26
*********************************
