This message was posted by Mama Kass on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1467.html I've been living with and compensating for skipped stitches since our Big Red was new; maybe you can help. This occurs on wide satin stitches (at least this is where I notice it). We embroider almost entirely on poly satin, poly micro velvet and rayon brocades using mainly satin stitch designs that we digitize to copy the look of heavy free-motion machine embroidery done in Greece and Russia. Many elements have wide satin stitches that I try to keep under 3/8" wide. To get the thick look I use a double zigzag underlay (10/90). This also helps hide the problem I have had with skipped stitches. Here is all the info I can think of for diagnosis: -Organ DBxK5 75/11 ball, no burrs, orientation slightly off center -YLI metallic thread (seems to be identical to RA and has few breaks when my digitizing is up to par) -speed 500-1000, mostly 800 -presser foot just touching surface -bobbin tension, a 2-4" drop when gently bounced -drum tight hooping with athletic wrap on a jacket back hoop -various cutaway backings as recommended to me by Fred Lebow -I lube often as Rod recommends -I've set both the hook timing and retaining support finger (using the looped thread method) -Hugo walked me thru tensioning my X-belt a few months ago -AMPASS runs fine with Madiera rayon We are 1 1/2 hours from a city of any size and 1/2 hour from the interstate so I'd like to avoid the huge cost of a tech visit. Any suggestions would be appreciated. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================