[amayausers.com] Re: needles
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 3 May 2010 22:11:11 UT
This message was posted by Kathy Shaw on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/939.html#000002
Ok I first started the speed at 900 then brought it down a little bit at a time
brought it all the way down to 600 this was a big dumptruck design for the back
of a jacket I did get it finished but it took longer than expected.The funny
part is I was using maderia 30 wt metalic then I switched to robinson anton
metalic color 1005 and it worked great so what I was thinking of trying a
needle with a bigger eye, so does that sound like that may work? Also do you
know of a good digitizer that's not so expensive. The one i've been using is
sometimes a rip off but their real good at what they do.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts: