This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/565.html#000002 Gini, Are you using any backing and if so how much? What fonts? What pull comp is being used, if any? Minimum column width? Where is your "Auto lower limit" setting for auto activ-feed Where do you have your presser foot set at? Are you hooping the caps tightly enough? Watch the video that we made with Herb Acree. It is on the Amayausers web. Hooping tightly is important. How tight is the bobbin? Zig zag, double or single, together with edge walk or without? What stitch length and border% in the edge walk? Check the archives, there has been a lot of chatter about the cruise these past few months...not too long ago Tina mentioned that there were still some rooms available. Rod Springer Amaya Tech & Trainer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================