[amayausers.com] Re: heat press and fabric
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 30 Mar 2010 19:56:49 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/911.html#000002
Nylon/spandex is going to look terrible with embroidery, the thread isn't going
to stretch like the fabric will.
I've heat sealed onto 100% poly before-at higher temps but not for more than 18
seconds.
I would call your DTG supplier/tech and talk with them...they should (BETTER)
know about working with this fabric before you ruin it or have a print that
washes off! Might end up having to do it as a sublimation print but you can't
do that with DTG
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
