[amayausers.com] Re: .dst File - Stitching Problem
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 10 May 2010 15:56:37 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1247.html#000002
It's the material, pique is the worst material to sew fine lettering and narrow
designs on-it is not stable because of the texture. You probably have to
increase the pullcomp on the design and lettering a LOT...and maybe even have
to use a solvy for a topping to hold the thread above the material.
Really going to be difficult to do a perfect design on a heavy pique simple
because of the 'thickness' of the material-the highs and lows screw up the
thread and can mat down so 'circles' turn into ovals.
You are going to need some sample pique material to play on to get your
settings and changes to work on it. Can't set it with backing material, has to
be similar to what the customer is supplying.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
