[amayausers.com] Re: design giving me trouble
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 4 May 2009 13:01:48 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/365.html#000007
A quick hint that works for me...turn SHORT STITCHES 'OFF'...that cures a lot
of thread breaks for me whenever there are fine details in the design or small
lettering.
And 'thin' columns...make the density 'less' go to 5 if it's 4.5, go to 6 if
it's 5.5, etc.-and it will still look fine! Thread breaks occur when you try to
cram more stitches in a smaller area than needed.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
