[amayausers.com] Re: color change won't work
- From: OnleeJudy@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 25 May 2010 15:14:38 EDT
After you put the color change in, did the lettering still show up in the
design tree?
In a message dated 05/25/2010 12:13:36 P.M. Pacific Daylight Time,
image_maker31@xxxxxxxxx writes:
Yes I did but lost the lettering in the box on the second design.
--- On Tue, 5/25/10, OnleeJudy@xxxxxxx <OnleeJudy@xxxxxxx> wrote:
From: OnleeJudy@xxxxxxx <OnleeJudy@xxxxxxx>
Subject: [amayausers.com] Re: color change won't work
To: amayausers@xxxxxxxxxxxxx
Date: Tuesday, May 25, 2010, 2:08 PM
Did you put a color change between the two?
In a message dated 05/25/2010 12:06:55 P.M. Pacific Daylight Time,
image_maker31@xxxxxxxxx writes:
I am combining 2 designs that I had digitized and when the first design
stops the same color thread needle will auto start on the new design which is
a box that has lettering in the box and the box color will sew the same
needle that ended from the first design and the lettering in the box
diappears. It should be 2 different colors and or needles between the 2.
Any ideas what is going on???
Thansk!
Other related posts:
