[amayausers] Re: assistance please
- From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 3 Oct 2006 13:32:18 -0700
Sounds like that would fit into a 22 round hoop
that would be much easier and secure than the clamping system,
but I may be wrong or you may not get those
with the start up kit anymore.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504 Fax 541-471-0427
420 SW H Street, Grants Pass, OR 97526-2532
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
----- Original Message -----
From: "Cindy Chamberlin" <ImpressiveThreads@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, October 03, 2006 1:19 PM
Subject: [amayausers] assistance please
> Content-Type: text/plain;
> charset="us-ascii"
> Content-Transfer-Encoding: 7bit
>
>
> I have a design I am going to apply to the back of denim shirts and front of
> hooded sweatshirts ( full front no zipper). It is a large design with over
> 33,000 stitches and I am looking for advice on how best to hoop it with a
> clamp type of frame. (7.5" X 6".) I want to make sure the material and
> backing stays tight. I did a sew out on it last night and it came out
> surprisingly beautiful, for a stock design, but I did have some puckering at
> the edges and I think this is because there was some flagging going on. The
> only other way to hoop this, with what I have on hand, is the really large
> wooden frames that come with the Amaya as part of the start up kit. The
> design is 5.024" X 5.244". I am reluctant to use adhesive spray based on the
> large number of stitches and effect it has on needles. Since I have used my
> clamp system only once, on a jacket, I am a little apprehensive to use it on
> shirts.
>
> Any suggestions?
>
>
>
> Thanks
>
> Cindy Chamberlin
>
> Impressive Threads Custom Embrodiery
>
> Ofc: 623-879-9761
>
> Cell: 602-710-0887
>
> impressivethreads@xxxxxxx
>
>
>
>
>
>
> -- No attachments (even text) are allowed --
> -- Type: image/jpeg
> -- File: image001.jpg
>
>
> -- No attachments (even text) are allowed --
> -- Type: image/gif
> -- File: image002.gif
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
