This message was posted by Debbie Rinehart on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/495.html#000002 Chrissy, I just did some Port Authority black rapid dry shirts and used the 505 spray under a no show mesh and one layer of tearaway. I too had the remains of the spray and if it's real light it will dry up but if I get a glob of spray outside the logo area, I spray a mixture of water and downey softener(1 tbls downey in a full spray bottle)on the spot and blot it with a hand towel. I mainly have this mixture in a spray bottle to melt the remains of my solvy topping that stays inside small letters. After picking out the big pieces and spraying the logo with the mixture, I blot it with the towel and let it air dry. HTH Debbie =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================