[amayausers.com] Re: Walking Stitches problem HELP!
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 28 May 2010 15:48:43 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1260.html#000008
I find the most common reason thread shreds or frays is because the needle it
turned too far from straight forward.
Otherwise, it could be a bad needle, scratch along thread path, presserfoot is
too high, thread feed rollers lacking lubrication, etc...
What is the machine doing on other needles?
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
