[amayausers.com] Re: Trimmer knife
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 18 Oct 2010 13:17:00 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1041.html#000001
whoops...meant to put this here, but was not logged in correctly..
Sharon and I have had very limited access to the internet and so have not seen
our email on a regular basis .....
To answer your question, late as it may be, the knife sits in a carrier and the
carrier has the small hole in it that you are describing. The "spring" you
mention is acually the pushrod that moves the knife back and forth. So yes, the
"spring/pushrod" does go into that hole in the back of the carrier. If it is
not in this hole then yes, you will most certainly have trimming issues. There
is also one of these pushrods that moves the selector back and forth. It also
must be attached to the selector for trimming to take place.. sorry to not have
been able to respond sooner.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
