[amayausers] Re: Towels - Suggestions?

  • From: John Yaglenski <john@xxxxxxxxxxxxx>
  • To: Amaya Users <amayausers@xxxxxxxxxxxxx>
  • Date: Sat, 22 Jul 2006 15:28:22 -0400

So, do you use tear away in addition to the solvy on the bottom?

JOHN


On 7/22/06 3:18 PM, "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx> wrote:

> I also use solvy on the bottom (2 layers on bottom, 1 layer on top) as it
> allows the embroidery to be more flexible/softer.
> 
> Terri
> Embroidery Creations
> 
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of John Yaglenski
> Sent: Saturday, July 22, 2006 1:01 PM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Towels - Suggestions?
> 
> Solvy on the bottom?  Hmm... who would have thought!
> 
> - - - - - - - - 
> John Yaglenski 
> President / Chief Executive Officer
> Levelbest Communications
> 
> I: www.levelbest.com
> P: 301.591.2481 / 888.229.1779
> F: 501-631-4544 
> 
> active website design . web hosting . content driven websites
> 
> This e-mail message and any attachments are confidential and may be
> privileged.  If you are not the intended recipient, please notify Levelbest,
> 
> immediately -- by replying to this message or by sending an e-mail to
> john@xxxxxxxxxxxxx -- and destroy all copies of this message and any
> attachments.  Thank you.
> 
> 
> 
> ---------- Original Message ----------------------------------
> From: LogosInThread@xxxxxxx
> Reply-To: amayausers@xxxxxxxxxxxxx
> Date:  Sat, 22 Jul 2006 13:32:50 EDT
> 
>> 
>> I like doing towels.  I always use solvy on top and frequently on the
> bottom 
>> of the design also. Perhaps that would help your situation and speed up
> the 
>> process.
>> Linda
>> Logos In Thread
>> 
>> In a message dated 7/22/2006 11:16:44 A.M. Eastern Daylight Time,
>> john@xxxxxxxxxxxxx writes:
>> Morning  Everyone:
>> 
>> Looking for suggestions on how best to do towels.  We  are in the midst of
>> doing 70 or so for the local swim team.  They are  turning out fine - with
>> the exception that we are getting a TON of lint in  the bobbin case - so
> much
>> so that we have to blow it out and either clean  out the case or install a
>> stand by to keep things rolling while we clean  the first one out.
>> 
>> Just wondering if anyone had a better way to do this  to cut down on the
>> towel "dander".   Like I said, the design  looks fine - covering
> beautifully
>> - just looking to speed/clean up the  process.
>> 
>> 
>> 
>> John Yaglenski
>> Levelbest  Embroidery
>> 
>> 
>> 
>> 
>> ===========================================================
>> 
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>> 
>> ===========================================================
>> 
>  
> 
> 
> 
> 
> ________________________________________________________________
> Sent via the WebMail system at mail.levelbest.com
> 
> 
>  
>                  
> ===========================================================
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
> 
> ===========================================================
> 
> ===========================================================
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
> 
> ===========================================================

- - - - - - - - 



John Yaglenski
President / Chief Executive Officer
Levelbest Communications

I: www.levelbest.com
P: 301.591.2481 / 888.229.1779

active website design . web hosting . content driven websites

This e-mail message and any attachments are confidential and may be
privileged.  If you are not the intended recipient, please notify Levelbest,
immediately -- by replying to this message or by sending an e-mail to
info@xxxxxxxxxxxxx -- and destroy all copies of this message and any
attachments.  Thank you. 


=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: