[amayausers.com] Re: Thread breaks - bobbin problem?
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 26 Aug 2010 20:50:11 UT
This message was posted by April on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1014.html#000004
Thank you for all of the input...it just seemed that this started happening
when I switched to a different bobbin, then when I found an old one to use I
was stitching fine, it ran out and problems again. I am in the process of doing
a complete lubrication and hope that that will work! I have a large box of
these bobbins to use (I did get them from an emb store)- i am not sure of the
brand, will check with the store.
Hooping and backing have not been the problem.
Thanks again!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
