[amayausers] Re: Thread Break and Machine Jump
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 31 Jan 2007 17:30:40 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/72.html#000002
When I've seen this happen...it is because the thread didn't 'cut' when it was
supposed to, but the needle bar moves to the next color and/or the hoop moves
to the next sewing spot-pulling the
thread (still connected) and finally ending up tight enough to snap the thread
off. Before it breaks, it has prevented the hoop from moving to where it
'should' have stopped-and the 'slingshot' effect of the thread breaking will
cause the hoop to jump (sometimes) but most often the thread didn't break until
it had pulled so hard it shifted the MATERIAL inside the hoop...and now you are
no longer aligned.
That's all I can think of...
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
