Roland, I use Micro Block and Micro Times alot on small stuff. I've even stitched it smaller than recomended by setting density at 4.5 or 5 and it worked well. Mike Roland R. Irish III wrote: >Okay, we're getting up to speed finally with the Amaya all checked >out and running fine. Sanmar work jackets running now-only a couple, >but did the fronts with the new speed clamp, no backing, auto feed >running. Only stitch breaks was a nicked needle. Backs are running >now, 33,000 stitches with wooden hoop inside the back. >Next up-I have a chance to do some 'donation' of goods for the >Chamber of Commerce Casino nite gifts. I'm going to do some fleece >blankets-with their logo on it. Want to add our company name >discretely on the other corner. What is the smallest, cleanest font >(STOCK-one that comes with Designshop, not one I have to buy) that >will give me good clean legible lettering? I don't think I've found >it by trial and error yet-for 2 years we have never found the right >font for lettering less than 1/2". I know it is there but what one, >and what settings? >Thanks to whomever fills me in! >Roland > >Sunrise Graphics >116 Main St >Claremont, NH 03743 >603-543-1324 >fax 603-543-9902 >www.sunrisegraphics.org >signman@xxxxxxxxxxxxxxxxxxx > > > > > > >