[amayausers.com] Re: Satin Stitches
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 26 Oct 2007 14:32:28 UT
This message was posted by oldkush on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/132.html#000003
Barbara
1/4" [6mm] is a good number to remember when it comes to max. satin stitch
width. This doesn't mean that at times it won't be necessary to go a bit wider
but try to keep to 1/4" or less as much as possible.
Creating satin stitches wider than 1/4" will 1) put extra demand on the
machine while stitching 2) create embroidery which is more susceptable to
loose stitching / snags 3) often mean more pull on the material.
If satin stitches become too wide, they will be converted to jump stitches by
the software ... and stitches a series of jump stitch is not a pleasant process
for a machine.
Bob
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
