Thanks for the info David Bob David Anderson - Keband A'Asia wrote: >Bob, > >OK, I have returned from the wilderness of no internet and mobile >phones, where I had a chance to test the new power fail recovery on an >XT and original AMAYA > >With machine on and OS operating, I disconnected the power to both the >PC and machine, the repowered. > >When the machine was powered up again, the needle which was being used >and was still down, raised then the machine performed a trim, and found >needle 1 before returning to sewing needle. > >Opened OS, and the software connected to the machine and reloaded >design. > >Pressed start button, and the machine continued to sew from where it had >stopped, with the stitch number in the OS software being recovered, and >design continued without fault. > >Power fail recovery was great. > >Cheers > >David Anderson > >Keband Australasia Pty. Ltd. >18 Daphne Cres, >Hurstbridge. Vic. 3099 >Australia >Email: info@xxxxxxxxxx > > > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================