Barbara, This feature is in there, however, if you are running your software in "Force Download", it loads clean files every start up. This negates the ability for it to return after a power outage. Herb Royal Embroidery ----- Original Message ----- From: "Lee & Barbara Ott" <digitalstitchz@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Tuesday, October 17, 2006 4:54 PM Subject: [amayausers] Power Outage > > I was told that if you turn off the machine and you hadn't finished a > design,it would go back to the same place when you turned it back on. > Well, > I just had a power outage. I had to turn off the machines and restart. > Theywanted to start at the beginning. With the new upgrades in the > software,has this feature been left out / compromised? > > Barbara Ott > > > > > Digital Stitchz > > 905 Texas Street > > Fairfield, CA 94533 > > (707) 426-9963 Phone > > (707) 426-9983 FAX > > Embroidery, Applique, Vinyl Lettering &numbers, Screenprinting &Laser > Engraving----- Fight back spam! Download the Blue Frog. > http://www.bluesecurity.com/register/s?user=ZGlnaXRhbHN0aXRjaHo4Njc5 > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================